User manual AUDIOVOX DV1200ENG

[. . . ] Important Safety Instructions WARNING The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING:TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. [. . . ] Press the POWER/STANDBY button on the front panel or press the POWER button on the remote control to turn on the Unit while the Unit is in standby mode, press the FUNCTION button to select DVD mode. See CUSTOMIZING THE FUNCTION SETTINGS (page 30 to 37) before proceeding to step 2. Place the disc on the disc tray with the label side up. It takes a short while for your Unit to load the disc. After loading, for some discs, the Unit will automatically start playback of the disc. Notes: · Use the OPEN / CLOSE button on the front panel to open or close the disc tray. Do not push the disc tray or you may damage the Unit. · Let the disc tray open completely before removing the disc. Press the OPEN / CLOSE button to close the disc tray after you remove the disc. Pausing playback (still mode) Press the II PAUSE button. To resume normal playback, press the PLAY button. Stopping playback Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the PLAY button. If you press the STOP button twice, the Unit's memory will be cleared and pressing the PLAY button will reset the disc to the beginning. To skip to a different track · Press the DVD CD SKIP button once to skip to the start of the previous track. · Press the SKIP button to skip to the next track. · For audio CD disc, use the number buttons (remote control only) to jump straight to that track number. E - 17 (continued on next page) Playing a Disc Fast Forward/Fast Reverse DVD CD 1. Press the TUNING or TUNING button when a disc is playing. · The disc begins fast scan at x2 speed. or TUNING · Four speeds are available. Each time TUNING button is pressed, the speed of fast scan changes in the following sequence: Note : You also can press and hold 2. Press the SKIP button on front panel repeatedly to select different fast scan speed. PLAY button when you reach the desired point to resume playback at normal speed. Slow-motion play DVD 1. Press the SLOW or SLOW button in the play mode. Each time SLOW or SLOW button is pressed, the speed of slow-motion playback changes in the following sequence: 2. Press the PLAY button to return to the normal playback speed. SKIP (Forward / Reverse) DVD CD While you are playing a disc, press the NEXT button of the remote or SKIP button of front panel to move to the beginning of the next chapter or track. Press the PREV button of the remote or SKIP button of the front panel to move to the previous chapter or track and automatically start playing it. Zooming into an image While a disc is playing, press the ZOOM button. [. . . ] · Make sure that you've selected the correct equipment on the system. · The system is in pause mode or in Slow-motion Play mode. Press the to return to normal play mode. · Fast forward or fast reverse is performed. [. . . ]