User manual AUDIOVOX DV1201ENG

[. . . ] STS92 IB Cover Size: 148 x 210 mm R CD PLAYBACK CD-R 1 Important Safety Instructions The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in this owner manual. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. [. . . ] As such, the DVD Unit may not respond to all operating commands. Refer to the instruction notes of discs. " may appear on the TV screen during operation. A " " is not permitted by the DVD Unit or the disc. " means that the desired operation Playing a Disc 1. Press the STANDBY/ON button on the front panel or press the STANDBY/ON button on the remote control to turn on the Unit while the Unit is in standby mode, press the FUNCTION button to select DVD mode. See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2. 3. Place the disc on the disc tray with the label side up. It takes a short while for your Unit to load the disc. After loading, for some discs, the Unit will automatically start playback of the disc. Notes: · Use the OPEN/CLOSE button on the front panel to open or close the disc tray. Do not push the disc tray or you may damage the Unit. · Let the disc tray open completely before removing the disc. Press the OPEN/CLOSE button to close the disc tray after you remove the disc. Pausing playback (still mode) Press the II PAUSE button. To resume normal playback, press the PLAY button. Y Stopping playback Press the STOP button at the location where you want to interrupt playback. To resume playback at the position where the disc was stopped, press the PLAY button. If you press the STOP button twice, the Unit's memory will be cleared and pressing the PLAY button will reset Y the disc to the beginning. To skip to a different track · Press the PREV button on the remote once to skip to the start of the previous track. · Press the NEXT button on the remote to skip to the next track. · For audio CD disc, use the number buttons (remote control only) to jump straight to that track number. E - 17 (continued on next page) E-17. pmd 17 4/24/2004, 12:30 PM Playing a Disc Fast Forward/Fast Reverse DVD CD The speed of fast scan or TUNING button when a disc is playing. 1. Press the TUNING · The disc begins fast scan at x2 speed. or TUNING · Four speeds are available. Each time TUNING button is pressed, the speed of fast scan changes in the following sequence: x2 2. Press the PLAY button when you reach the desired point to resume playback at normal speed. [. . . ] · The system is in pause mode or in Slow-motion Play mode. Press the to return to normal play mode. · Fast forward or fast reverse is performed. PLAY button PLAY button to return to normal · Check the speaker settings. [. . . ]