User manual AUDIOVOX FPE3000 Owners Manual

[. . . ] LCD TV Owner's Manual FPE3000 Before operating the unit, please read this manual thoroughly. 128-7081 Contents Congratulations on your purchase of this LCD TV. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this LCD TV. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents Important safety cautions. . . . . . . . . . . . . . . . . . . 5 Identification of controls . . . . . . . . . . . . . . . . . . . . . . . 8 Antenna connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Sleep timer. Selecting input signal 1. Press the button on the remote control or SOURCE button on the set's panel to select input mode. You can select TV, AV, S-video, YCbCr, YPbPr or PC. If you want to go to TV mode, press button repeatedly to select TV mode. Press DSP button, the screen display current mode. Press ENTER to cancel OSD. 21 Operations in TV mode Channel Preset To enter into CHANNEL SETTING menu CHANNEL SETTING Auto search Source Current Prog Skip Auto fine tune Antenna 12 ON OFF 1. Press MENU button repeatedly to display CHANNEL SETTING menu. Press VOL+ or VOL- button to confirm or adjust selected item. <LEFT> or <RIGHT> key to change Antenna / Cable selection Enter into CHANNEL SETTING menu and select Source item. Press VOL- or VOL+ button to select Antenna or Cable. Antenna: If using a VHF/UHF antenna (2-68). Cable: If using Cable TV (2-125). CHANNEL SETTING Auto search Source Current Prog Skip Auto fine tune Antenna 12 ON OFF <LEFT> or <RIGHT> key to change Auto Search Please enter into CHANNEL SETTING menu and select Auto Search item. Press VOL- or VOL+ button to start Auto Search and all active programs will be memorized. Antenna Auto searching During the process of Auto Search, pressing MENU button will stop Auto Search. 28 VHFL Press <Menu> to escape Adding and skipping channels After auto search, you can add or skip channels as follows: Select a channel to be added or skipped by direct channel select buttons. CHANNEL SETTING Enter into CHANNEL SETTING menu and Auto search select Skip item. Source Antenna 12 Press VOL- or VOL+ button to select On or Current Prog ON Skip Off. Auto fine tune OFF <LEFT> or <RIGHT> key to change Skip On: To skip the current channel. Skip Off: To add the current channel. Fine tuning In area of inferior broadcast conditions where adjustment is necessary for a better picture and sound, use Fine tuning. Use 0~9 digit buttons or CH5/6 buttons to select the desired channel, then enter into CHANNEL SETTING menu and select Auto fine tune item. Press VOL+ button to select ON to activate the auto fine tune. CHANNEL SETTING Auto search Source Current Prog Skip Auto fine tune Antenna 12 ON OFF * To exit the menu, press ENTER button. <LEFT> or <RIGHT> key to change 22 Channel Select 8 Use 0-9 digit buttons Use 0-9 digit buttons to select one-digit channel number. - -5 5 Press 0-9 button Press ENTER button To select two-digit channel: - -5 Press 0-9 button Press 0-9 button -51 51 Press ENTER button To select three-digit channel: - -1 Press 0-9 button Press 0-9 button -11 Press 0-9 button 110 Note: the period of two-press should be within 3 seconds. Use CH5/6 button Press CH5 button, the channel number increases; Press CH6 button, the channel number decreases. Use previous channel button Press this button to switch between the current channel and previous channel. 23 Picture adjustment PICTURE SETTING Brightness Contrast Color Sharpness Tint <LEFT> or <RIGHT> key to change 50 50 50 50 50 Adjusting picture 1. Press MENU button to display PICTURE SETTING menu. 2. Press CH5/6 button to select item. Item Brightness Contrast Color Sharpness Tint VOLdarker weaker paler softer purplish VOL+ lighter stronger deeper sharper greenish The adjusted settings are stored in the User mode. There are three preset picture modes and one User-set picture mode. Press the P. M button to select a picture mode according to your favorites. 4. [. . . ] . . . <LEFT> or <RIGHT> change, <Menu> return Press VOL+/- to enter MOVIE RATING Rating MPAA G MPAA PG MPAA PG-13 MPAA R MPAA NC-17 MPAA X A/B A A A A A A <UP/DOWN>move, <LEFT/RIGHT>change If you set PG-13, G and PG movies will be available, and PG-13, R, NC-17 and X will be blocked. * To exit the menu, press ENTER button. 30 V-chip setting TV RATING setup TV Parental Guidelines may have one or more letters added to the basic rating to let parents know when a show contains higher levels of violence, sex, adult CCD and Vchip SETTINGS 1. Press CH5 or CH6 button to select TV Block Settings item. Press VOL + or VOL- button to enter into TV RATING sub-menu. Press VOL+ or VOL- button to select the desired rating. [. . . ]