User manual AUDIOVOX MMD102

[. . . ] Notice An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in "park" or when the vehicle's parking brake is applied. An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver's seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Do not use any solvents or cleaning materials when cleaning the video system. [. . . ] The OFF position will prevent the lights from turning ON with the vehicle's interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle's interior lighting. Do not leave the vehicle unattended with the dome light switch in the ON position, as this could result in a discharged battery. REMOTE SENSOR The MMD102 incorporates an Infrared sensor which relays signals from the remote control to allow the source connected to DVD and AV1 to be controlled simply by pointing its remote control at the remote sensor eye. this provides control of auxiliary equipment such as a Video Cassette Player. The infrared sensor can relay signals from most manufacturer's remote control to its respective component connected to the AV1 input. In this case you must use the remote control supplied with the component. SELECT VIDEO There are 3 inputs to select from the SOURCE Select. pressing the source button on the remote control will change the source selected in the following order: DVD , AV1and AUX. The source can also be changed by pressing the TV button followed by the menu button. to select the source , highlight SELECT VIDEO and press the ENTER button to enter the submenu. Then, press the UP / DOWN button to select from DVD, AV1, AUX. NOTE: The menu also disappears from the screen automatically if you do not press any button within a few seconds. SET PICTURE When watching the program, the quality of the picture can be adjusted to suit your taste. These functions can also be accessed by repeatedly pressing the PIX button on the remote. Description of Adjustment Items: Item BRIGHTNESS CONTRAST Press DOWN button To darken the picture Decrease the contrast for soft color To decrease the color intensity Press UP button To brighten the picture Increase contrast for vivid color To increase the color intensity All the picture adjustment function (BRIGHTNESS, CONTRAST, COLOR) will go back to the factory settings. AV 1 and AUX * The AV1 or AUX input may be connected to a DVD player, video game system, or other audio / video input. To play the AV1 or AUX source, turn the MMD102 ON and press the TV Menu button on the Remote Control. select INPUT SELECT and press UP/DOWN button until "AV1"or "AUX" is displayed on the screen and press ENTER. Turn the source component on with its power button or remote control. The MMD102 is now ready to play the audio and video signals from the source connected to AV1 or AUX inputs. These functions can be also be accessed by repeatedly pressing the source button on the remote. * NOTE: Additional Accessory Cable may be required to connect more than one video source to the MMD102. [. . . ] Check the type of disc you put into disc tray. This DVD only plays digital video discs, audio CDs and MP3s. â· Both the unit and the disc are coded by region. If the regional codes don't match, the disc can't be played. [. . . ]