User manual AUDIOVOX SIR-PNP3

[. . . ] Shuttle User Guide SIR-PNP3 s. seek p. tune 001 C hannel N am e A rti st S ong C ategory 12: 00P A -1 JUMP 128-7193A 1 of 32 Released: 8-6-04 Revision A: 8-10-04 Removed maximum FM frequency reference; default display mode PDT to 2 lines and font type to A. Congratulations You are one step closer to experiencing the latest innovation in Sirius Satellite Radio. Sirius will revolutionize your in-home or vehicle entertainment with: · Over 120 channels of original programming, including ­ 65 channels of 100% commercial-free music ­ guaranteed, Over 50 channels of world-class sports, news, talk and information. Your Audiovox Shuttle receiver must be used with an adapter kit, such as the Audiovox Home kit, Boom Box or Vehicle Kit as required by your specific installation needs. These kits are available at retailers where Audiovox main units are sold. [. . . ] In this case, a pop-up screen is displayed for 2 seconds indicating the city list is being up dated, and the display then returns to the previous menu option. NOTE: Current city abbreviations are presented in APPENDIX A of this manual onPage 29. Rotating the encoder knob or pressing the CH+/CH- button on the remote scrolls through thecity list, highlighting each city for selection. When the desired city is highlighted, press the Encoder knob to confirm selection. The city ID is then saved for the Jump feature. If the action is canceled without making a selection (by pressing MENU to return to main menu), no city ID is saved. However, if a city is Jumpset Option When the "JumpSet" option is highlighted on the "Choose Jump Setting" screen, and the Encoder knob is pressed to select this option, the Jump but ton can now be used as a JumpSet function. The -15- 128-7193A 15 of 32 display appears for 2 seconds, as shown previously, providing directions to set the JumpSet channel, before returning to the "Choose Jump Setting" screen. Options. Then follow the previous steps describing city selection. Tuning and Alert While listening to any Sirius programming, a press and release of the Jump button, or a press and hold of the Jump Button activates the Jump function. If this is the first time the Jump button is activated, refer to Initial Activation. Other wise, the receiver will recognize whether the Jump button has been set to city traffic report or simply as a JumpSet button. The tuning and alert mechanism only works in the normal operation mode, and not in Channel List Mode, Category List Mode, Preset Tuning Mode or Menu Option Mode. Traffic/City Market If the receiver determines that the Jump button is set to Traffic (City Market), it then detects whether a City ID has been set. If the City ID is not present (not set inadvertently), the adjacent screen appears indicating the Button was not set. 2 sec. Once the Jump button is set to function as JumpSet, the Traffic line displays "NONE" to signify that the button can no longer be set to traffic alert. Initial Activation When the Jump Button is pressed for the very first time, a pop-up shall appear indicating "Set Jump Button" for 2 seconds, before taking the user to the following "Jump Setting" screen of Menu 2 sec. -16- 128-7193A 16 of 32 If a city ID has been set, the receiver will immediately start scanning all channels for a matching City ID. While searching for the city ID, a pop-up appears for 2 seconds, with "XXX Pending", where XXX is the 3-letter abbreviation of the city name, specifying that the receiver is indeed search ing and waiting for the desired traffic/weather report. The band indicator (preset bank) on the dis play changes to the Jump button icon to signify that the receiver is in searching mode. The receiver continues searching until a match is found or any list mode (Channel list, category list, Preset Tune Mode or Menu Option) is entered prior to a found match. When it exits any of the list modes and returns to the normal operation mode, the city ID search resumes until a match is found. If the selected city's traffic/weather information is being broadcast on a different channel, then the receiver tunes to that channel immediately. If the city of choice is the current channel, the receiver tunes to the previous channel. The audio remains on the current channel until the receiver is tuned to the favorite channel. If no previous channel is available; e. g. , first channel tuned to after a power cycle, an audible beep occurs and the receiver remains tuned to the current channel. [. . . ] SELECT/ DIRECT- Used to confirm selection in various lists and menus. CAT+ Used to access categories in ascending order. CH+ Used to access streams in ascending order. Also used for adjustments in the various menus. [. . . ]