User manual AUDIOVOX VE1040 Owners/installation Guide

[. . . ] LOW PROFILE DVD/TV/SPEAKER PHONE OWNER'S/INSTALLATION GUIDE - DVD Player & 10. 4" TFT LCD Monitor - Multi-Function Remote Control - Built-in Speaker Phone Mode - Cable Ready 125 Channel Tuner - Internal Stereo Speakers - Under Cabinet Mounting - A/V Input -1- 128-6451 Introduction Record model number and serial number in the space provided below. Refer to these numbers whenever you call upon your Audiovox dealer regarding this product. Serial No. INFORMATION WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] The time indication disappears from the Vacuum Flourescent Display(VFD) and a series of dashes will appear ( : -- : - indicating the alarm Deactivated mode. NOTE : The set times will be stored in memory and can be reactivated whenever desired by performing steps 1) - 3) of the DEACTIVATING THE ALARM procedure. SETTING THE ALARM TONES 1) Press the SET button twice (power off). 2) Press the TEL button once to hear the alarm tone. NOTE : Alarm must be in the "Activated" mode to hear tones. 3) Pressing Preset button 1, 2, or 3 will select a different tone. 4) Press the POWER button to select this tone. 5) When the alarm sounds, press the POWER button to turn it off. - 14 - Remote Control Functions (1) OPEN/CLOSE (2) POWER (3) DVD (4) TV (5) AM/FM (6) A/V (7) Digit 0 -9 Select (8) ENTER (9) CLR (10) TEL (11) MUTE (12) VOL+/(13) STOP (14) PLAY (15) FUNCTION UP/DOWN Select (16) PREV. , NEXT (17) SR (18) SF (19) PAUSE/STEP (20) FR (21) FF (22) ZOOM (23) A-B (24) AUDIO (25) SUBTITLE (26) SEARCH (27) DISPLAY (28) MENU(ADD) (29) TITLE(ERASE) (30) REPEAT (31) SETUP(AP) (32) Channel UP/DOWN Select -15 - Remote Control Functions DVD MENU (1) OPEN/CLOSE : Press this button to Open and Close the disc tray. (2) POWER : Press this button to turn power On and Off. (3) DVD : Press this button to select DVD mode of operation. (6) A/V : Press this button to select external A/V source 1 or 2. (7) 0 ~ 9 : For direct selecting a chapter(or track) and for password Input. (8) ENTER : Press this button will cause the chapter (or track) change to occur immediately. (9) C L R : Press this button to erase an incorrect chapter(or track) entry. (10) TEL : Press this button to answer an incoming call ( The VE1040 contains a hands-free speakerphone). (11) MUTE : Press this button to remove all sound ( + + + + blanks on display). ) (12) V O L + / - : Use these buttons to increase or decrease the volume level. (13) STOP : Press this button to stop disc playback. (14) PLAY : Press this button to start disc playback. (15)(32) UP, DOWN, RIGHT, LEFT : For selecting item on menu. (16) P R E V / N E X T : For skipping to the next or previous chapter or track. (17) SR : Slow Play (1/2, 1/4, 1/8) speed in reverse. [. . . ] (If it was affected, wait for 1 hour before playing the DVD). When camera angles cannot be changed * The disc being played does not support ANGLE functions. * In order to check whether the disc supports the ANGLE functions, see if the ANGLE indicator on the upper part of the main display is illuminated. When subtitles cannot be changed * The disc being played does not support subtitle functions. [. . . ]