User manual AUDIOVOX VE720

[. . . ] VE720 UNDER THE COUNTER 7" TV, AM/FM RADIO and DVD PLAYER OWNER'S and INSTALL · · · · · · · Slot-in DVD Player & 9" TFT LCD Monitor Multi-function Remote Control Cable Ready 125 Channel TV Tuner AM/FM Radio 2 A/V Inputs Internal Stereo Speakers Under Cabinet / Table Top Mounting 0 INTRODUCTION WARNING ­ To prevent fire or shock hazard, do not expose this unit to moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL . CAUTION USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol alerts the user to the fact that exposed "dangerous voltages" reside within this product's enclosure and contact with any of these voltages will result in electric shock. This symbol alerts the user that important and maintenance (servicing) instructions in the literature accompanying the unit. To prevent electric shock: do not use this unit's polarized ac plug with extension cords, receptacles or other outlets that prevent the units plug from being fully seated and leave any part of the blade exposed. 1 INFORMATION Installation of this equipment shall be in strict accordance with the manufacture's instructions. [. . . ] NOTE: If a series of dashes appear (--: --), the Alarm is DEACTIVATED. 2) Press the CH up/down buttons to set the desired hour/minute. When setting the alarm, check the AM/PM indicator to assure the proper setting. 3) Press the SEEK buttons to toggle between the hours and minutes. Once the alarm is set it will sound each day at the same time as long as it is activated. DEACTIVATING ALARM 1) Press the SET button twice to enter the alarm mode. The set time will disappear from the Display Window and a series of dashes (--: --) will appear, Alarm DEACTIVATED mode. NOTE: The set time will be stored in memory and can be reactivated whenever desired by performing step 1) ­ 3) of the ACTIVATING ALARM procedure. SETTING THE ALARM TONES 1) Press the SET button twice (power off). 2) Press the P4 button once to hear the alarm tone. NOTE: Alarm must be in the "Activated" mode to hear tones. 3) Each time CH UP/DOWN button(s) is pressed it will select a different alarm tone. 4) Press the ON/OFF button to confirm the selected tone. 5) When the alarm sounds, press the ON/OFF button to turn it off. SETTING THE ALARM VOLUME 1) Power OFF 2) Press the SET button twice for the Alarm setting mode. 3) To select alarm tone, Press "P4" button and press volume UP/DOWN for your desired volume level. Then, press "SET" button for volume setting 17 SETTING THE CABLE TV MODE 1) Press the SET button three times to enter the TV/Cable configuration mode. 2) CABLE or AIR will appear on the display. 3) Press the SEEK button to select Cable mode. 4) Press the CH UP/DOWN button(s) to select the desired cable mode (STD/IRC/HRC). 5) When the desired mode is reached, press the ON/OFF button to confirm. SETTING THE AIR TV MODE 1) Press the SET button three times to enter the TV/Cable configuration mode. [. . . ] Select Rating by or buttons and press ENTER to enter the Rating setup page 2. Enter the current password and press ENTER button (unlock). button and press ENTER button to enter the sub-menu. button and input either the default password or any new 4-digit 4. [. . . ]