User manual AUDIOVOX VME 9122 TS

[. . . ] VME 9122 TS 52 Thank you for choosing a Audiovox product. We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all the features of your new Audiovox VME 9122 TS Mobile Multimedia Receiver for maximum enjoyment. Preparation Optional Equipment Warning Wiring Diagram Media Link Installation Anti-Theft Feature Controls and Indicators Remote Control Using the TFT Monitor Operating Instructions Multi-ZONE Operation Setup Menu Tuner Operation DVB-T Operation DVD/VCD Video Operation DVD/CD Audio Operation MP3/WMA/iPod Operation Bluetooth Operation Troubleshooting Care and Maintenance Specifications 54 55 56 57 58 59 61 62 64 67 69 71 72 77 80 81 85 87 94 98 100 101 53 Subject to technical changes PREPARATION Congratulations on your purchase of the Audiovox VME 9122 TS Mobile Multimedia Receiver. It's a good idea to read all of the instructions before beginning the installation. [. . . ] NOTE: DVD-R and DVD-RW will not play unless the recording session is finalized and the DVD is closed. Ejecting a Disc Press the button on the unit or remote control (35) to eject the disc. The unit automatically reverts to Tuner mode. You may eject a disc with the unit powered off. The unit will remain off after the disc is ejected. Reset the Loading Mechanism If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the the unit or remote control (35) to reset the loading mechanism. Normal operation resumes. button (16) on Accessing DVD Mode To switch to DVD mode when a disc is already inserted, press the SRC button (6) on the front panel or remote control (8) until "DISC" appears at the bottom of the screen. Controlling Playback To access the on-screen controls, touch the screen. Touch the 1/2 button to view a second page of controls. 81 Subject to technical changes Stopping Playback Touch the stop button ( ) on the screen or press the / BAND button (20) on the remote control to stop DVD play. Pausing Playback Touch the pause button (||) on the screen (or press the >/|| button on the remote control) to suspend disc playback. Press the > button on the screen to resume disc playback. Fast Forward Playback Press the /\ button on the joystick or the >> button on the screen to fast forward. Keep pressing and releasing the button to increase the rate from "2X" to "4X", "6X", and "8X". Press the joystick enter button (18) on the remote control or touch the play button (>) to resume normal playback. Fast Reverse Playback Press the \/ joystick button or touch the << button on the screen to play the current title in fast reverse. Keep pressing and releasing the button to increase the rate from "2X" to "4X", "6X", and "8X". Press the joystick ENTER button (18) on the remote control or touch the play button (>) to resume normal playback. Slow Forward/Slow Reverse Playback Press the ||> / BAND button on the remote control to slow forward/slow reverse. Keep pressing and releasing the button to increase the slow forward rate from "2X" to "4X" and "8X" and then begin slow reverse. Repeat Playback Press the RPT button (20) on the control panel, the RPT button (7) on the remote control, or the to alter repeat mode according to the following: · DVD: Repeat Chapter, Repeat Title, Repeat Off · VCD (PBC Off): Repeat Single, Repeat Off NOTE: For VCD play, the repeat function is not available if PBC is on. Sectional Repeat Function (A-B) Use the A-B function to define a specific area of a disc to repeat. · Press the RPT A-B button (6) on the remote control (or the A-B button on screen) to set the start point (A) of the repeated section. · Press the RPT A-B button again once you reach the desired end point (B) of the repeated section. [. . . ] Select the "Bluetooth" sub-menu. Touch the area to the right of "Auto answer" to select "On". Auto Connect The auto Connect option will allow the VME 9122 TS to automatically connect to your previously paired Bluetooth when it is in range. When the Connect option is set to "Manual", you must double press the button to re-establish a connection with your phone. [. . . ]