User manual AUDIOVOX VOD806

[. . . ] PO WE R EJE CT R EW PL AY F. F STO P VOD806 VO LU ME VOD705 C H A NN EL A U TO SO U RC E PIC TU RE PR O GR A M SEL EC T SEL EC T ON OFF A U TO 8" LCD OVERHEAD TV/MONITOR WITH DVD PLAYER H EA D PHON ES A UD IO IN PU T VIDEO IR L R ® ELECTRONICS CORP. 128-6258 Released 03-08-02. 128-6258 1 of 28 Important Notice It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the driver's seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, the VOD806 should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle. Warnings Do not use any solvents or cleaning materials when cleaning the video monitor. Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. [. . . ] Press the FM Transmitter On/Off switch to turn the FM Modulator on. The LCD screen will display the frequency setting of the FM Modulator. Pressing the Select button will change the Frequency of the FM modulator (88. 3/ 88. 7/89. 1) AV1 The AV1 input may be connected to a Video Cassette Player (VCP), video game system, or other audio / video device. To access the AV1 input, turn the VOD806 on and press the source button on the VOD806 or the Source button on the remote control until "AV1" is displayed on the screen. Turn the video source component on with its power button or remote control. The VOD806 is now ready to play the audio and video signals from the source connected to the AV1 input. AUX A video game system, Camcorder or other audio / video device may be connected to the AUX Input jacks (see Figure 1. for the location of these jacks) To access the AUX source, turn the VOD806 on and press the source button on the VOD806 or the Source button on the remote control until "AUX" is displayed on the screen. Turn the video source component on with its power button or remote control. The VOD806 is now ready to play the audio and video signals from the source connected to the AUX input. -11- 128-6258 14 of 28 DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Loading and Playing Discs Before you load a disc, make sure that it is compatible with the player and that there is not a disc in the player already NOTE: that the following Discs CANNOT be used with this player : MiniDisc CD-I, CD-ROM, CD-RW, DVD-ROM Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don't match, the disc won't play. Other regional codes cannot be played in this unit. The unit will display "REGION CODE VIOLATION. " To load and Play a Disc When you press the Power button the unit will turn on and display the source selected. Select DVD mode and insert the disc (Label Up) into the disc compartment. When the disc is half way in it will be automatically pulled in and play will begin. NOTE: If the VOD806 is not in DVD mode, it will not accept the disc. Do Not Force the disc into the slot as this could damage the mechanism. Types of Discs your DVD will play DVD Discs ­ DVDs which contain video. CD Discs ­ Audio CDs containing musical or sound content only. MP3 Discs ­ A disc that contains audio files (for example, a CD-R with downloaded MP3 files). VCD Discs ­ VCD discs which contain video. -12- 128-6258 15 of 28 Settings and Adjustments This chapter describes how to set and how to adjust using the on-screen SETUP menu. Using the Setup Display Using the setup display, you can do the initial setup, adjust the picture and sound quality, and set the various outputs. [. . . ] Try another disc. · It is normal for some distortion to appear during forward or reverse scan. No forward or reverse scan · Some discs have sections that · prohibit rapid scanning or title and chapter skip. If you try to skip through the warning information and credits at the beginning of a movie, you won't be able to. This part of the movie is often programmed to prohibit skipping through it. Can't advance through a movie · You can't advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action. [. . . ]