User manual AUDIOVOX VR182

[. . . ] VR182 MOBILE AUDIO SYSTEM Installation and Operation Manual VR182 SAFETY INFORMATION When Driving Keep the volume level Iow enough to be aware of the road and traffic conditions. Protect from Water Do not expose the product to water, as this can cause electrical shorts, fire or other damage. Protect from High Temperatures Exposure to direct sunlight for an extended period of time can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback. [. . . ] Press the AUDIO button (3) to confirm entry of each character. Press the ENTER button (22) to start the title search. The unit will search files and directories containing the specified characters. Directory/File Name Search Inserting and Ejecting a Disc Insert a disc, label-side up, into the disc slot (24) with the unit turned on. The unit will automatically draw the disc in and play the first track on the disc. Press the eject button (23) to stop disc play and eject the disc. The unit does not have to be turned on to eject the disc. Controlling Disc Playback Selecting Tracks Press the SEEK > (19) or SEEK < button (20) to advance to the next track on the CD. The selected track number will appear on the display. Press and hold the SEEK > (19) or SEEK < button (20) to fast forward or fast reverse through the disc. CD play starts when the button is released. For an MP3/WMA disc, press the DISC/DIR UP or DN button (10/9) to skip to the following/ previous folder. Play/Pause Disc Playback Press the >/|| button (26) to suspend disc play. Press the >/|| button again to resume disc Play. Previewing Tracks Press the SCAN button (6) on the control panel to play the first 10 seconds of each track sequentially. Press SCAN again to stop Intro Scan and resume normal play at the current track. 10 VR182 SIRIUS RADIO OPERATION tune to that channel. While viewing a category list, press the DISP button to change display information between Channel Name, Artist, or Song Title. Storing Preset Channels The preset buttons (27) can be used to store 6 channels per band (SIR1, SIR2 and SIR3), allowing convenient access to your favorite channels. Select the channel you want to store in memory. Press and hold a preset button (27) until the corresponding preset button number appears. Repeat steps 1 and 2 to program additional channels. Recalling a Preset Channel Press one of the six preset buttons (27) within a selected band to tune a preset channel directly. Channel Preset Scan Press the AS/PS button (15) to preview each stored preset channel in SIR1, SIR2 and SIR3 for 10 seconds. Press the AS/PS button again to stop scanning and play the current channel. Direct Tune Mode Switching to SIRIUS Mode Press the MODE button (4) to change the mode to Sirius Satellite Radio mode. Press and hold the S-MOD button (22) to switch to Direct Tune/Skip Channel mode. After accessing Direct mode, "DIRECT _ _ _" appears on the display. Use the TUNE ADJUST UP/DN knob (22) to select a number for the hundreds digit position. [. . . ] Usually, the ignition noise can be suppressed considerably by using a radio suppression type high voltage ignition wire and suppressor resistor in the ignition system. (Most vehicles employ this wire and resistor but it may be necessary to check them for correct operation. ) Another method of suppression is the use of additional noise suppressors. These can be obtained from most CB/A radio or electronic supply shops. · · · · · Interference Radio reception in a moving environment (automobile) is very different from reception in a stationary (home). It is very important to understand the difference. [. . . ]