User manual AUDIOVOX VR187

[. . . ] We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all the features of your new JENSEN receiver for maximum enjoyment. PLL Synthesizer Stereo Radio Sirius-Ready Satellite Radio Function Integrated 7" LCD Monitor with 5-Position Tilt Function Compatible with Audiovox NPD 5500 Navigation System and VCCT130 Tilt Camera Automatic Memory Storing Preset Equalization Electronic Shockproof (ESP) Function Digital Compact Disc Player CD Changer Control Auxiliary Input Function The following tools and supplies are needed to install the unit. Torx type, Flat and Phillips screwdrivers Wire cutters and strippers Tools to remove existing radio (screwdriver, socket wrench set or other tools) Electrical tape Crimping tool Volt meter/test light Crimp connections 18 gauge wire for power connections 16-18 gauge speaker wire Speakers with a load impedance less than 4 ohms could damage the unit. [. . . ] Press CH/TUNE up (12a) or down (12b) for less than three seconds to move the radio frequency number up or down one step. Press CH/TUNE up or down for more than three seconds to move to next station automatically. To automatically select six strong stations and store them in the current band, select a band (if needed) and press AMS (14) for more than three seconds. The new stations replace stations already stored in that band. The unit will pause for five seconds at each preset station. Press AMS again to stop scanning when the desired station is reached. Press WB (15) to access the weather band mode, which features NOAA seven-frequency broadcast. The unit will automatically search all seven frequencies and select the strongest station. To change the channel manually, press CH/TUNE up or down to move to the next or previous of the seven channels. 525) does not have a corresponding preset button and can only be accessed by pressing CH/TUNE. Press CH/TUNE up or down (18a or 18b) for less than one second to advance to the next or previous track on the CD. the selected track number will appear on the display. Press CH/TUNE up or down for more than one second to fast forward or fast reverse through the disc. CD play starts when the button is released. Press RPT (19) during disc play to continuously repeat the selected track. During disc play, press SCAN (20) to play the first 10 seconds to each track on the disc. When the desired track is reached, press SCAN again to end the scan and play the selected track. Press SHUF (21) during disc play to play all tracks on a CD in random, shuffled order. Refer to the owner's manual included with the CD changer for instructions on installing, loading and using the CD magazine. When accessing CDC mode, disc play will begin with the first CD that the unit detects, and the disc and track numbers will be shown in the display. To select the desired disc for play, press CAT/DISC up (22a) to advance to a higher disc or CAT/DISC down (22b) to return to a lower disc. The number of the disc in play will appear on the display. [. . . ] Although AM is subject to interference, it has the ability to be received at great distances because the broadcasting signals follow the curvature of the earth and are reflected back by the upper atmosphere. The following maintenance tips will extend the life and optimize the performance of the unit. if it is exposed to moisture , wipe it dry immediately. Liquids may contain minerals that can corrode the electronic circuits. [. . . ]