User manual AURIOL 4-LD2630

[. . . ] Ensure noone can trip over or unplug the extension lead. It must be fitted with an earth connection. - Do not leave the appliance unattended when it is switched on. - Great care must be taken when ironing in the presence of children. [. . . ] Connection point for a) flexible hose for accessories b) for optional iron 10. Attach main hose to connection point : a click indicates that it is locked in position. The accessories may be attached to the pistol handle or to an extension tube. NB : when using the rectangular or triangular brush, remember to first insert the curved connector. Turn it to the right and press it into the brush. straighten up the curved connector as shown. Move the locking switch to position 2 = fixed position or position 3 = swivel position To release the connector reverse this procedure. Attaching cloth to the rectangular brush Press down on end of clamp ; secure cloth under clamp ; release clamp. Insert the anti-scale cartridge into the empty tank. To obtain steam, the anti-scale cartridge must be inserted into the water tank. TYPES OF WATER You can use : tap water, distilled water for irons, and water produced by a condenser tumble drier provided that it is filtered (e. An optional iron is available which can be attached to the steam cleaning appliance Manual steam control Steam power can be adapted to different linen requirements by turning the steam regulator. EMC - Electronic Mineral Control The EMC system prevents scaling by continuously measuring the efficiency of the anti-scale cartridge and monitoring water quality. Thus the EMC system eradicates any risk of scaling. The EMC system automatically triggers warning light • Flashing red lamp B = the anti-scale cartridge will need to be changed soon. Continuous red light = the appliance will no longer produce steam : it is essential to change the antiscale cartridge, or use demineralised water. Changing the anti-scale cartridge • Press «on/off» button to off position, so that warning light B stops flashing. The appliance will not function unless the anti-scale cartridge is properly inserted in the water tank. PLEASE NOTE Before each use, ask for steam for a few seconds at the maximum steam setting to remove any water condensation which may be located in the main hose. APPLICATIONS Large Rectangular Brush • For smooth surfaces the cloth should be fixed to the 4 corners. To clean very dirty floors apply the brush directly to the floor without exerting pressure on the bristles : then wipe with the cloth. For varnished parquet flooring, marble floors and delicate floor surfaces, place the cloth under the brush. [. . . ] - The reservoir is incorrectly inserted or has not been inserted. - Other - Fill the reservoir - Insert the reservoir and replace the tank cap - Go to your local approved service dealer The supply of steam is - Long periods of steaming interrupted - Wait until the indicator light illuminates again before requesting steam. MAINTENANCE • To clean the body of the appliance, simply use a moist cloth. Do not use solvents or detergents which may harm the body material. [. . . ]