Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual AUTOTECH 10.202.3012K 3022K. We hope that this AUTOTECH 10.202.3012K 3022K user guide will be useful to you.
Lastmanuals help download the user guide AUTOTECH 10.202.3012K 3022K.
Manual abstract: user guide AUTOTECH 10.202.3012K 3022K
Detailed instructions for use are in the User's Guide.
[. . . ] Installation Instructions
Part Number: 10. 202. 3012K 2. 0L Golf/ Jetta 1996-1999 10. 202. 3022K VR6 Golf/ Jetta 1995-99 Description: Mk3 OBDII COLD AIR INTAKE INSTRUCTIONS Notes:
Before starting the installation of you new Autotech Cold Air Intake System there are a few things that you should be aware of and a couple of basic tools that will help in the installation process. 1. ) be aware that you will be removing some parts and not reusing them due to the fact that they will be in the way of the new intake system. [. . . ] Remove small vacuum line from middle of the vacuum "T" under the mass-air meter, and install supplied vacuum hose (the thinnest size) using our clamp. Remove the leak detection pump inlet hose at the inlet of the pump. (Hose is coming from filter near the mass-air meter) 9. Install supplied hose union and 5/8" vacuum hose to the end of the original hose for the leak detection pump filter, using supplied 13-20mm. (once the pump is re-mounted this hose will need to be re-attached to the pump) 10. Remove the harness plug from the leak detection pump. 11. Remove the suction hose from the leak detection pump (be carefull to remove the elbow/ hose without damaging the plastic locking ring) (this step requires no tools, just pinch the fitting and remove) 12. Remove the leak detection pump (slide up in slots) 13. Cut the suction hose 2" from the plastic elbow. 14. Extend the clear suction hose with the supplied hose (3/8") and secure with supplied 17mm. clamps 15. Install the supplied Autotech silicone coupler and clamps to the long end of the inlet tube. 16. Install the complete inlet tube into the car 17. Install K&N filter to the Autotech CAI inlet tube (on the end near the holddown tab), from underneath the airbox area. (be careful not to overtighten the clamp. ) 18. Drill 1/8" hole through the hole in the mounting tab of the inlet tube. [. . . ] 24. Attach the vacuum hoses to the lower radiator support using the supplied zip-ties. 26. Securely attach all vacuum hoses in the engine compartment so they won't be damaged by engine vibration. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AUTOTECH 10.202.3012K 3022K
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual AUTOTECH 10.202.3012K 3022K will begin.
