User manual AVANTI 18 CYC

[. . . ] We have provided many important safety messages in this manua l for your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the wo rds " DANGER", "WARNING" or "CAUTION". Danger means that failure to heed this safety statement may result in severe personal injury or death. Warning means that failure to heed this safety statement may result in extensive product damage, serious personal injury, or death. Caution means that failure to heed this safety statement may result in minor or moderate personal injury, property or equipment damage. [. . . ] The power cord of this unit is equipped with a three-prong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock. Do not under any circumstances cut or remove the third ground prong from the power cord supplied. For personal safety, this appliance must be properly grounded. This unit requires a standard 115/120 Volt AC ~/60Hz electrical outlet with three-prong ground. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. The cord should be secured behind the unit and not left exposed or dangling to prevent accidental injury. The unit should always be plugged into its own individual electrical outlet which has a voltage rating that matches the rating label on the appliance. Recommended thermostat setting for ice making is position 5. Fill the ice cube tray (two thirds of it) with cold water or with any liquid suitable for freezing and place the tray on the bottom of the chiller compartment to freeze properly. Dry the tray, otherwise it may stick to the bottom of the chiller. The outside of the unit should be cleaned with mild detergent and warm water. Wring excess water out of the sponge or cloth before cleaning the area of the controls, or any electrical parts. 10 ? Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth. CAUTION: Failure to unplug the unit could result in electrical shock or personal injury. CAUTION Do not use boiling water because it may damage the plastic parts. In addition, never use a sharp or metallic instrument to remove frost as it may damage the cooling coils and will void the warranty. Use a sponge or t owel to pick up the melting ice off the unit floor. Remove the frozen food from the chiller compartment and place it in a cooler to protect the food. ?Power Failure Most power failures are corrected within a few hours and should not affect the temperature of your unit if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, you need to take the proper steps to protect your food. ?Short vacations: Leave the unit operating during va cations of less than three weeks. Long vacations: If the appliance will not be used for several months, remove all food and unplug the power cord. [. . . ] Al conectar y encender su unidad, asegúrese de rotar el control de temperatura hacia la posición de "6". Este control de temperatura puede variar desde " " hasta la posición " ", después de haberse 0 5 mantenido en la posición "6" por 24 o 48 horas aproximadamente, regrese el control de temperatura para ajustarlo a la posición que más se ajuste a sus necesidades, por ejemplo la posición "3" sería apropiada para usar su unidad en su hogar u oficinas. Para apagar su unidad, simplemente rote el control de temperatura hacia la posición de "0". Nota: Rotando el control de temperatura hacia la posición de "0", Usted solamente apaga el cyclo de enfriamiento, pero no desconecta su unidad de la fuente de corriente. [. . . ]