User manual AVIOSYS IP KAMERA 9070-CS FIRMWARE V1.2.1.4PLUS

[. . . ] IP Kamera 9070-CS User Manual Release Date: 08/10/2010 Firmware Version: 1. 2. 1. 4plus - 1Ref#90020326K0709 Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. IP Kamera 9070-CS was designed for indoor use, the manufacturer responsibility for possible damages caused by outdoor use, especially in the rain. Please use the power adapter provided by the dealer, the manufacturer responsibility for the possible damage from using power adapters not. Do not shake the IP Kamera 9070-CS in any fashion 4. [. . . ] NTSC/60Hz PAL/50Hz Each country has their TV broadcasting standard, please check with your local service provider to find out if you us a NSTC system or PAL system. Mirror: The mirror function allows you to flip the image of the device around. Depending the direction and the way the camera is mount you can use this setting to change the angle of the picture. Normal View: Normal View Horizontal View Vertical Both - 26Ref#90020326K0709 Rate Control: Select the Bit Rate Control that fits your needs. CVBR: Constrained Variable Bit Rate CBR: Constant Bit Rate Internet Speed: The Internet Speed settings allows you to choose some preset settings to best fit your current internet speeds. From here you can select from the following options: Cable / ADSL: Most high speed internet users today use Cable / ADSL as the main internet provider line. Fiber Optics: High speed fiber optics provides the best solution for outside the network because it is very fast. Intranet (LAN): When using the IP Kamera from within the network this is the best option. Custom: This setting allows you to manually input a setting for the Bit Rate, FPS, and picture quality. M-JPEG Settings: The available Quality settings and FPS for the M-JPEG settings are shown below M-JPEG Quality Settings High Medium Low M-JPEG Frame Rate Settings 30 FPS 15 FPS 7. 5 FPS 3 FPS 1 FPS MPEG4-1 Bit Rate: Select a value from 64~8000. FPS: Select a FPS from 30fps, 15fps, or 7. 5fps MPEG4-2 Bit Rate: Select a value from 64~8000. FPS: Select a FPS from 15fps or 7. 5fps Tune Image The tune image settings section allows you to control and tune the picture quality of the image. Keep in mind, the quality of the picture will also be affected by the quality of the lens that is being used. - 27Ref#90020326K0709 White Balance: Select from the following options auto, indoor, or outdoor Day and Night: Select the mode Day or Night TV Output: Select the mode enable or disable to output to a T. V Binning / Skipping mode: Binning enables low light-light performance. Select Binning, Skipping, 4x Binning mode (default is Binning) BLC (Backlight control): Select from one of the options on or off to control the Backlight: Select a value between (0~255) Brightness: Select a value between (0~255) Contrast: Select a value between (0~255) Saturation: Select a value between (0~255) Sharpness: Select a value between (0~255) Default: To Return all values to normal default click on this button. Note: Make sure you click on the Apply button to save any changes made Network The Network settings section allows the user to setup their network information for the IP Kamera. - 28Ref#90020326K0709 Network The network section allows you to setup the network information for the IP Kamera 9070. Enable DHCP: This function will enable the DHCP for the 9070CS. If this is enabled the IP Address of the device will be automatically provided by the router of the device. IP Address: The IP Address will be displayed here. To change the IP Address of the device simply change the values and hit submit. By default it is set to 255. 255. 255. 0 Default Gateway: The default gateway address is the address to connect to the router. DNS Server: Domain Name System Address Http Port: Enter the port that you would like the 9070 to connect on. MAC: The Mac Address or physical address of the device Note: Make sure you click on the Apply button to save any changes made - 29Ref#90020326K0709 FTP The FTP section of the IP Kamera 9070 allows you to save video clips FTP Server: Enter the FTP server address here User Name: Enter the FTP Username Password: Enter the FTP Password File Upload Path: Enter the upload path of the FTP Server SMTP (Outgoing E-mail Server) Enter the SMTP E-mail server information here. The SMTP section allows the 9070CS to send emails out using the SMTP settings. [. . . ] Using Surf 16 CH and multi device DVR monitoring software, you can easily view your 9070CS. Follow these simple steps: MAC Address There are two ways to find the MAC address in IPEdit. *Note: IP Server must be enabled on your device's webpage. Find MAC Address in LAN Using IPEdit 1. ) In IPEdit, highlight the device that you are using. [. . . ]