User manual AVIOSYS IP KAMERA 9070-CSWO FIRMWARE V1.2.1.4PLUS

[. . . ] IP Kamera 9070CSWO/CSO User Manual Release Date: 9/2010 Firmware Version: 1. 2. 1. 4plus - 1Ref#201008109070CSWO Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. IP Kamera 9070-CSWO/CSO was designed for indoor use, the manufacturer responsibility for possible damages caused by outdoor use, especially in the rain. Please use the power adapter provided by the dealer, the manufacturer responsibility for the possible damage from using power adapters not. Do not shake the IP Kamera 9070-CSWO/CSO in any fashion 4. [. . . ] Normal View: Normal View Horizontal View Vertical Both - 30Ref#201008109070CSWO Rate Control: Select the Bit Rate Control that fits your needs. CVBR: Constrained Variable Bit Rate CBR: Constant Bit Rate Internet Speed: The Internet Speed settings allows you to choose some preset settings to best fit your current internet speeds. From here you can select from the following options: Cable / ADSL: Most high speed internet users today use Cable / ADSL as the main internet provider line. Fiber Optics: High speed fiber optics provides the best solution for outside the network because it is very fast. Intranet (LAN): When using the IP Kamera from within the network this is the best option. Custom: This setting allows you to manually input a setting for the Bit Rate, FPS, and picture quality. M-JPEG Settings: The available Quality settings and FPS for the M-JPEG settings are shown below M-JPEG Quality Settings High Medium Low M-JPEG Frame Rate Settings 30 FPS 15 FPS 7. 5 FPS 3 FPS 1 FPS FPS: Select a FPS from 15fps or 7. 5fps MPEG4-2 Bit Rate: Select a value from 64~8000. MPEG4-1 Bit Rate: Select a value from 64~8000. FPS: Select a FPS from 30fps, 15fps, or 7. 5fps Note: PTZ is only available in the mode below. When you enable PTZ it will automatically jump into that mode. - 31Ref#201008109070CSWO Tune Image The tune image settings section allows you to control and tune the picture quality of the image. Keep in mind, the quality of the picture will also be affected by the quality of the lens that is being used. White Balance: Select from the following options auto, indoor, or outdoor Day and Night: Select the mode Day or Night TV Output: Select the mode enable or disable to output to a T. V Binning / Skipping mode: Binning enables low light-light performance. Select Binning, Skipping, 4x Binning mode (default is Binning) BLC (Backlight control): Select from one of the options on or off to control the Backlight: Select a value between (0~100%) Brightness: Select a value between (0~100%) Contrast: Select a value between (0~100%) Saturation: Select a value between (0~100%) Sharpness: Select a value between (0~100%) Default: To Return all values to normal default click on this button. Note: Make sure you click on the Apply button to save any changes made - 32Ref#201008109070CSWO Network The Network settings section allows the user to setup their network information for the IP Kamera. Network The network section allows you to setup the network information for the IP Kamera 9070. Enable DHCP: This function will enable the DHCP for the 9070CSWO. If this is enabled the IP Address of the device will be automatically provided by the router of the device. IP Address: The IP Address will be displayed here. To change the IP Address of the device simply change the values and hit submit. By default it is set to 255. 255. 255. 0 Default Gateway: The default gateway address is the address to connect to the router. DNS Server: Domain Name System Address Http Port: Enter the port that you would like the 9070 to connect on. MAC: The Mac Address or physical address of the device Note: Make sure you click on the Apply button to save any changes made - 33Ref#201008109070CSWO Wireless Settings The wireless settings section will allow you to setup the wireless feature of the 9070-CSWO. Please refer to page 18 or Setting up wireless section for more details. FTP The FTP section of the IP Kamera 9070 allows you to save video clips FTP Server: The FTP server address is where the IP Address of the FTP server will be entered. User Name: Enter the FTP Username Password: Enter the FTP Password File Upload Path: Enter the upload path of the FTP Server SMTP (Outgoing E-mail Server) Enter the SMTP E-mail server information here. [. . . ] *Note: Make sure when you are typing in the MAC address to leave out the ":" Find MAC Address in WAN Using IPService on IP Edit 1. ) To find your MAC Address through the internet, Open IP Edit and hit the connect button on IP Service. 2. ) Then Type in the name of your device in this case it is Sample Name, then hit the search button. 3. ) Your device should be listed and the MAC address should be displayed on the screen. Copy down the MAC address and use it to connect via CNT. Add device using CNT 1. ) On Surf 16 Ch DVR software, right click on the screen on one of the windows and select Add Camera 2. ) Then under the section labeled MAC: Type in the MAC address. - 61Ref#201008109070CSWO 3. ) Do not forget to enter the password and login. 10. ) Frequently Asked Questions (F. A. Q) For More updated FAQ please visit the FAQ section of website at: http://sites. google. com/site/aviosysfaq/ Q1: Why can't I view the video files that I have recorded, nothing is playing? [. . . ]