User manual AVIOSYS IP KAMERA 9070-IRW FIRMWARE V1.2.1.4PLUS

[. . . ] IP Kamera 9070-IRW User Manual Release Date: 2010/7/22 Manual Version: V1. 00 Firmware Version : V1. 2. 1. 4plus - 1Ref#90020326K0709 Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. IP Kamera 9070-IRW was designed for outdoor/ indoor. Please use the power adapter provided by the dealer, the manufacturer is not responsibility for the possible damage from using power adapters. Do not shake the IP Kamera 9070-IRW in any fashion 5. [. . . ] By default the snapshot path will be in C:\9070\ - 29Ref#90020326K0709 To use the snapshot function: 1. ) Click on the snapshot button, and you will see the screen flicker black. 2. ) In explorer go to the selected path and the files will be created there. Image The image section allows you to change the Image settings for the device and tune the image of the IP Kamera 9070-IRW Image Settings The Image settings section allows you to change the video settings and the Name of the Kamera. Camera Name: Select a camera name for the device and then hit submit Video Codec: The Video Codec sections allows you to select different the types of codec you would like to set your IP Kamera, By selecting different resolutions your - 30Ref#90020326K0709 Resolution: In the resolution section you can select from the following options. Resolution (MPEG4+MPEG4+JPEG): M4:720P, M4:CIF, JPG:352 (MPEG4+M-JPEG): M4:VGA, JPEG:VGA M4:720P, JPG:720 (MPEG4-1+MPEG4-2) M4:720, M4:CIF Not supported in Firefox: (Single MPEG4): M4:720 (Single MJPEG): M4:720 Color System: Select the broadcasting color system that pertains to your country. NTSC/60Hz PAL/50Hz Each country has their TV broadcasting standard, please check with your local service provider to find out if you us a NSTC system or PAL system. Mirror: The mirror function allows you to flip the image of the device around. Depending the direction and the way the camera is mount you can use this setting to change the angle of the picture. Normal View: Normal View Horizontal View Vertical Both Rate Control: Select the Bit Rate Control that fits your needs. CVBR: Constrained Variable Bit Rate CBR: Constant Bit Rate Internet Speed: The Internet Speed settings allows you to choose some preset settings to best fit your current internet speeds. From here you can select from the following options: Cable / ADSL: Most high speed internet users today use Cable / ADSL as the main internet provider line. - 31Ref#90020326K0709 Fiber Optics: High speed fiber optics provides the best solution for outside the network because it is very fast. Intranet (LAN): When using the IP Kamera from within the network this is the best option. Custom: This setting allows you to manually input a setting for the Bit Rate, FPS, and picture quality. M-JPEG Settings: The available Quality settings and FPS for the M-JPEG settings are shown below M-JPEG Quality Settings High Medium Low M-JPEG Frame Rate Settings 30 FPS 15 FPS 7. 5 FPS 3 FPS 1 FPS MPEG4-2 Bit Rate: Select a value from 64~8000. FPS: Select a FPS from 15fps or 7. 5fps MPEG4-1 Bit Rate: Select a value from 64~8000. FPS: Select a FPS from 30fps, 15fps, or 7. 5fps Note: PTZ is only available in the mode below. When you enable PTZ it will automatically jump into that mode. Tune Image The tune image settings section allows you to control and tune the picture quality of the image. Keep in mind, the quality of the picture will also be affected by the quality of the lens that is being used. White Balance: Select from the following options auto, indoor, or outdoor Day and Night: Select the mode Day or Night - 32Ref#90020326K0709 TV Output: Select the mode enable or disable to output to a T. V Binning / Skipping mode: Binning enables low light-light performance. Select Binning, Skipping, 4x Binning mode (default is Binning) BLC (Backlight control): Select from one of the options on or off to control the Backlight: Select a value between (0~100%) Brightness: Select a value between (0~100%) Contrast: Select a value between (0~100%) Saturation: Select a value between (0~100%) Sharpness: Select a value between (0~100%) Default: To Return all values to normal default click on this button. Note: Make sure you click on the Apply button to save any changes made Network The Network settings section allows the user to setup their network information for the IP Kamera. Network The network section allows you to setup the network information for the IP Kamera 9070. Enable DHCP: This function will enable the DHCP for the 9070CSWO. If this is enabled the IP Address of the device will be automatically provided by the router of the device. IP Address: The IP Address will be displayed here. To change the IP Address of the device simply change the values and hit submit. By default it is set to 255. 255. 255. 0 - 33Ref#90020326K0709 Default Gateway: The default gateway address is the address to connect to the router. DNS Server: Domain Name System Address Http Port: Enter the port that you would like the 9070 to connect on. [. . . ] *Note: Make sure when you are typing in the MAC address to leave out the ":" Find MAC Address in WAN Using IPService on IP Edit 1. ) To find your MAC Address through the internet, Open IP Edit and hit the connect button on IP Service. 2. ) Then Type in the name of your device in this case it is Sample Name, then hit the search button. 3. ) Your device should be listed and the MAC address should be displayed on the screen. Copy down the MAC address and use it to connect via CNT. Add device using CNT 1. ) On Surf 16 Ch DVR software, right click on the screen on one of the windows and select Add Camera 2. ) Then under the section labeled MAC: Type in the MAC address. - 62Ref#90020326K0709 3. ) Do not forget to enter the password and login. 10. ) Frequently Asked Questions (F. A. Q) For More updated FAQ please visit the FAQ section of website at: http://sites. google. com/site/aviosysfaq/ Q1: Why can't I view the video files that I have recorded, nothing is playing? [. . . ]