User manual AVIOSYS IP KAMERA 9070CS-POE V1.3

[. . . ] IP Kamera 9070CS-PoE User Manual Release Date: 10/20/2009 Manual Version: 1. 3 - 1Ref#90020326K0709 Warning: Any changes made to this equipment without permission may cause damages to the device! IMPORTANT NOTICE 1. IP Kamera 9070-CS was designed for indoor use, the manufacturer responsibility for possible damages caused by outdoor use, especially in the rain. Please use the power adapter provided by the dealer, the manufacturer responsibility for the possible damage from using power adapters not . Do not shake the IP Kamera 9070-CS in any fashion 4. [. . . ] Each video file & picture can be accessed here and streamed through the internet. Live Video The Live video section of the IP Kamera 9070 is where you will live view the video of the device. From here you can change resolution, record onto current pc, take a snapshot, zoom, and detect motion detection. Type and Zoom Type: The type function allows you to set the streaming format for the IP Kamera 9070. You can select from the following type of resolutions depending on the format type you have set in the image settings. M-JPEG (640x 352) MPEG4-1 (1280x720) MPEG4-2 (352x192) Zoom: The zoom function allows you to select the screen size of the stream. Depending on the type that you have selected there will be different zooms that will be available. 1X zoom: The 1X zoom is the normal view for each type. - 23Ref#90020326K0709 2X zoom: This 2X zoom is 2 times the normal view for that type. Scaled 720: Is a resolution only available in MPEG-4-1, which sets the picture at 720P. Screen Size: Will enlarge the image to the who size of the screen. This function is very useful when trying to display on larger monitors. Motion Detection Motion Detection: The motion detection icon will display when motion has been detected. This setting must be activated in the application section When no motion is detected the motion detection icons will look like the following. But, in the case that motion is detected and recording has started, the icon will look will light up blue. Active Record Active Record: Active record will show up when the device is actively recording. Active recording functions like motion detection, scheduler, or an alarm will set off this automatic recording. When active recording is not activated it will look like the picture below When the active recording function is activated it will light up in red. Record Record: The record button on the9070-CS PoE when pressed will record the live video feed and save the video into the computer viewing. To record follow the following steps: 1. ) Click on the record button 2. ) Then select the folder that you would like to store the file. Then hit okay. - 24Ref#90020326K0709 3. ) Once the folder has been selected the device will start to record. To stop recording click on the red icon and it will return to the original state. Note: Remember you need VLC codec to play the video files that are recorded Snapshot Snapshot: The snapshot function, creates a easy way take pictures of the current view in the IP Kamera9070-CS PoE. To setup the snapshot destination folder: 1. ) Click on the Application link on the bottom menu 2. ) Then select Snapshot path 3. ) In here browse for the location where snapshot pictures will be stored. By default the snapshot path will be in C:/ To use the snapshot function: 1. ) Click on the snapshot button 2. ) In explorer go to the selected path and the files will be created there. Image The image section allows you to change the Image settings for the device and tune the image of the IP Kamera 9070 - 25Ref#90020326K0709 Audio Audio: The audio function allows you to hear the sounds coming from the IP Kamera 9070's built in microphone. To turn on the audio function: 1. ) Click on the Audio button 2. ) Then the audio button will start to move showing that sound is being transferred 3. ) To turn off the audio click on the button again. Note: Audio can only be enabled in Mpeg Mode. Image The image section allows you to change the Image settings for the device and tune the image of the IP Kamera9070-CS PoE Image Settings The Image settings section allows you to change the video settings and the Name of the Kamera. Camera Name: Select a camera name for the device and then hit submit Video Codec: \ - 26Ref#90020326K0709 Resolution: Resolution (MPEG4+MPEG4+JPEG): M4:720P, M4:CIF, JPG:352 (MPEG4+JPEG): M4:VGA, JPEG:VGA (MPEG4+JPEG): M4:720, JPEG:352 (MEG4+MPEG4): M4:720, M4:CIF (Single MPEG4): M4:720 Color System: Select the broadcasting color system that pertains to your country. NTSC/60Hz PAL/50Hz Rate Control: Select the Bit Rate Control that fits your needs. CVBR: Constrained Variable Bit Rate CBR: Constant Bit Rate M-JPEG Settings: The available Quality settings and FPS for the M-JPEG settings are shown below M-JPEG Quality Settings High Medium Low M-JPEG Frame Rate Settings 30 FPS 15 FPS 7. 5 FPS 3 FPS 1 FPS MPEG4-2 Bit Rate: Select a value from 64~8000. FPS: Select a FPS from 15fps or 7. 5fps MPEG4-1 Bit Rate: Select a value from 64~8000. FPS: Select a FPS from 30fps, 15fps, or 7. 5fps Enable EPTZ: The EPTZ on the IP Kamera 9070 a virtual EPTZ function. This function allows the user to control the video on the Live Video mode by moving left or right, zooming in and zooming out. To use the EPTZ mode: 1. ) Enable the EPTZ function and then hit the submit button. 2. ) Click on Live Video Mode 3. ) Click on EPTZ-Set and a new control window will pop out. - 27Ref#90020326K0709 From here you can control the live videos Zoom Function and direction. [. . . ] Follow these simple steps: Finding the MAC Address There are two ways to find the MAC address in IPEdit. *Note: IP Server must be enabled on your device's webpage. Find MAC Address in LAN Using IPEdit 1. ) In IPEdit, highlight the device that you are using. On the right side of IPEdit you will find the MAC Address that you will need to use CNT. [. . . ]