User manual AVISION AM3200

[. . . ] AM3000 series User's Manual AM3200 / AM3100L AM3230 (only for all other content except fax functions) (D/N: 250-0477-E V2. 0) Documents for the AM3000 series of products The documents for these series of products are divided as follows. Please refer to them for detailed information. Model Documents included Format AM3200 & AM3100L (Scanner-Printer-Copier) AM3000 series user's manual PDF files included on the accompanying CD-ROM AM3000 series quick guide AM3230 (Scanner-Printer-Copier-Fax) AM3000 series user's manual (only for all other content except fax functions ) AM3230 Fax user's Guide (only for fax content) Printed book PDF files included on the accompanying CD-ROM Printed book ii Trademarks The brands and product names herein are trademarks or registered trademarks of their respective holders. Copyright © 2001 Avision Inc. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of the manufacturer. Warranty The information contained in this document(s) is subject to change without notice. The manufacturer makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of fitness for a particular purpose. [. . . ] 2. Press Menu button Press the scroll button on the display. . Copy Setup" appears 3. Press Set button . 4. Press the scroll button until "21. Def Copy Mode" appears on the display. 5. Press the scroll button to select your desired Copy Mode item. Press Set button to save the selection. 4-14 To update your default Density setting : 1. 2. Press Menu button Press the scroll button on the display. . Copy Setup" appears 3. Press Set button . 4. Press the scroll button until "22. Def Density" appears on the display. 5. Press the scroll button to select your desired Density level. Press Set button to save the selection. AM 3000 series User's Manual 4-15 To update your default Zoom setting: 1. 2. Press Menu button Press the scroll button on the display. . Copy Setup" appears 3. Press Set button . 4. Press the scroll button until "23. Def Zoom" appears on the display. 5. Press the scroll button to select your desired Zoom item. Press Set button to save the selection. 4-16 To update your default Collate setting: 1. 2. Press Menu button Press the scroll button on the display. . Copy Setup" appears 3. Press Set button . 4. Press the scroll button until "24. Def Collation" appears on the display. 5. Press the scroll button to enable or disable the Collate function. Press Set button to save the selection. AM 3000 series User's Manual 4-17 5 Software Installation Installing Software 1. Insert the supplied CD into your CD-ROM. The installation menu appears, as shown below. 2. Click "Install TWAIN Driver" to install the product's driver. AM 3000 series User's Manual 5-1 3. When you finish installing the driver, connect a USB cable to your product: a. [. . . ] Wipe the pad in the direction from top to bottom. Be careful not to hook the pick springs. 4. Feeding Roller Paper-in Sensor ADF Pad 9-2 Cleaning the Glass The product is designed to be almost maintenance-free. However, it still needs to be cleaned occasionally to ensure optimum image quality and performance. To clean the glass, 1. [. . . ]