User manual AVISION AM7000N

[. . . ] An A3 Network MFP ­ Copy/Scan/Print User's Manual Regulatory model: MT-0904B Avision Inc. Safety Information When using this equipment, the following safety precautions should always be followed. Safety During Operation In this manual, the following important symbols are used: WARNING: Indicates potentially hazardous situations, which if instructions are not followed, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. Important: Indicates operational requirements and restrictions. Please read and follow these instructions to ensure a proper operation and to avoid damage to the machine. [. . . ] ON Setting OK 9. Press the green Start button. The copy is starting and the background color of your original is removed. 49 5. Installing the Printer Driver and the Scanner Driver If you wish to use the printing and the scan function, you need to install the printer driver and also the scanner driver. The printer driver and scanner driver is included in the supplied CD-ROM. Please follow these steps to complete the installation. System Requirement Windows 98/Windows Me/Windows XP/Windows 2003/Windows Vista Installing the Printer Driver When the MFP is connected to a Computer With a USB Cable 1. Insert the supplied CD into your CD-ROM drive. The installation menu appears, as shown below. 50 2. Click "Install Scanner Driver and Printer Driver" to install scanner driver, printer driver, and Button Manager in one step. 3. When you finish the installation, connect a USB cable to your product: a. Connect one end of the USB cable to your computer. Connect the other end to the USB port of your product. USB Port USB Cable 4. Since the product contains two USB devices, one is scanner and the other is the printer, the computer will prompt the "Found New Hardware" twice to identify the two USB devices. When the following "Found New Hardware" screen appearsclick Next and follow the on-screen instruction to complete the installation. 51 5. When the other "Found New Hardware" screen appearsclick Next and follow the on-screen instruction to complete the installation. Uninstalling the Printer Driver and the Scanner Driver 1. 2. Make sure your USB cable is connected to your product. From the "Start" menu, select "All Programs", the product model, and then "uninstall Driver". 52 Installing the Printer Driver When the MFP is Connected to Your Computer through A Network Cable 1. Insert the supplied CD into your CD-ROM drive. The installation menu appears, as shown below. 2. 4. Click "Install Scanner Driver and Printer Driver" to install scanner driver, printer driver, and Button Manager in one step. Open the Printers and Faxes window or Printers window. This will start the Add Printer Wizard, and then click Next. 53 5. Click Local printer attached to this computer or Local printer, clear the Automatically detect and install my Plug and Play printer check box, and then click Next. 6. Click Create a new port, and then select Standard TCP/IP Port in "Type of port". 7. 8. Click Next to run the Add Standard TCP/IP Printer Port Wizard. Enter the scanner's IP address, and then click Next. [. . . ] 32 Duplex duplex booklet, manual duplex . . . . . . . . . . . 64 Duplex Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108 ENLARGING PREVIEWED IMAGE . . . . . . . . . . . . 72 Ethernet Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Gamma. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]