User manual AVISION FL-1006S

[. . . ] Sheet-fed Duplex Scanner User's Manual Regulatory model: FL-1006S Avision Inc. Trademarks Microsoft is a U. S. registered trademark of Microsoft Corporation. Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. IBM, IBM PC are registered trademarks of International Business Machines Corp. [. . . ] Options Automatic Description Automatic adjusts the cropping window according to different document sizes. Use this option for batches of mixed-sized documents. This feature allows you to define the area or zone to be imaged. Use for batches of same-sized documents. If you select this option, you can use the arrow keys to define the x and y offset values, width and length to redefine your scanned area. The Display window will show image placement as you change the values. This feature allows you to define the area or zone to be imaged. Use for batches of same-width but different length documents. If you select this option, you can use the arrow keys to define the x and y offset values, width and length to redefine your scanned area. The Display window will show image placement as you change the values. Fixed to Transport EOP (End of Page) Detection 4-30 User's Manual Automatic Multiple Relative to Document This option allows you to place various sized documents such as photos, ID Cards, or business cards on the flatbed (if available) and lets you create multiple individually cropped images in one scan. Note: To correctly create multiple images, please make sure there is at least 12mm (0. 5") of space between each document. This option allows you to crop different areas on your documents and deliver these images in B&W, Gray, or Color separately. For example, there are applications which require you to store the entire document in B&W and a part of the document in color to save storage space. This is useful for documents where a photograph or signature appears in a consistent area on the document such as resumes, and so on. The following options are only available when Fixed to Transport is selected. X-Offset -- the distance from the left end of the scanner to the left edge of the scanning area. Y-Offset -- the position from the top end of the document to the top end of the scanning area. Width -- the width of the scanning area. Length -- the length of the scanning area. Center: automatically calculates the x-offset for centerfed feeding based upon document size selected. -- relocate the scan area by click the arrow key on the cross sign while retain the scan size. View the result from the Display window. 4-31 Relative to Document: (used for batches of same-sized documents) This option allows you to crop different areas on your documents and deliver these images in B&W, Gray, or Color separately. For example, there are applications which require you to store the entire document in B&W and a part of the document in color to save storage space. This is useful for documents where a photograph or signature appears in a consistent area on the document such as resumes, and so on. [. . . ] Your Scanner is now ready to use. Document 9. 2 Questions and Answers Question: Paper becomes jammed during scanning. Question: More than one sheet of paper are fed into the scanner. 2) Remove the multi-fed sheets of paper. Loosen the paper before putting it into the paper guide again. [. . . ]