User manual AVOCET CYCLOMETER 25

[. . . ] To reset hold down the left button then press the right button. Trip Distance, Average Speed, Ride Time, and Maximum Speed all reset together. You can reset from any of these four functions. When Ride Time reaches 10 hours, Trip Distance, Average Speed, and Ride Timer reset automatically. [. . . ] Press the right button to switch between miles and kilometers, then complete calibration. You can change between miles and kilometers without erasing stored data. To do this hold the left button in Total Distance (D) for six seconds and release when `mi' or `km' flashes. Switch between units with the right button. Stored maximum and average speeds and distance data are automatically converted to the units chosen when you use this method. Exit by pressing the left button. CALIBRATION NUMBERS. The calibration number is wheel circumference in millimeters or in inches multipled by 25. 4. Tire Size 20 x 1. 75 24 x 1 600 tubular 650 tubular 26 x 1 26 x 1. 25 26 x 1. 5 Number 1528 mm 1753 1759 1929 1913 1952 1986 Tire Size 26 x 1. 95/2. 0 26 x 2. 1 26 x 1 3/8 700C tubular 700 x 20 700 x 23 700 x 25 Number 2045 mm 2056 2068 2083 2081 2087 2091 Tire Size 700 x 28 700 x 32 700 x 38 27 x 7/8 27 x 1 27 x 1 1/8 27 x 1 1/4 Number 2096 mm 2116 2159 2077 2105 2123 2142 CALIBRATION. Find the calibration number that matches your tire size from the table, or measure tire circumference by the precise calibration method. Reach calibration from the Trip Distance function (d). Hold the left button until the calibration number 2155 shows in the lower display (4 Change the blinking seconds), release, then hold again 4 seconds until the right digit of the digit of the calibration calibration number blinks. Change the number with the right button. Press number with the right the left button to go to the next digit. After adjusting all the digits, press the button left button to exit. To check the calibration number, hold the left button in Trip Distance. After 4 seconds the calibration will appear, and it will remain displayed for 4 seconds after you release the button. PRECISE CALIBRATION. For the most precise calibration, measure the tire's circumference by the following method: Inflate your tires to your usual riding pressure. Mark the ground under the valve stem when the stem is at its lowest point. Get on the bicycle and have a helper push you in your normal riding position until the valve stem returns to its lowest point. Mark below the stem again, then measure the distance between the marks. If you measure in inches, multiply your measurement by 25. 4 to convert to millimeters. The calibration number is the tire circumference in millimeters. Hold down the right button in any function to display the clock. [. . . ] The warranty will not cover the battery, normal wear, damage, or loss and is void if the Cyclometer is disassembled by anyone other than an authorized Avocet Service Center. PROCESSING INFORMATION Customer service and product information are available at www. avocet. com/service. html or by calling 650-470-0478. Warranty claims are to be sent to the Service Center by the owner, not by the retail store where the Cyclometer was purchased. Only the original, dated cash register or charge card receipt will be accepted for proof of purchase date (no exceptions). [. . . ]