User manual AXIS 1650

[. . . ] AXIS 1650 User's Manual The Network Print & Scan Server for Canon Printers and Multifunctional Products Including support for Canon Advanced Printing Technology Canon Advanced Raster Printing System as well as Canon BubbleJet Printers AXIS 1650 User's Manual 1 Safety Notices Section 1 Important: Electromagnetic Compatibility (EMC) USA Safety Notices Take some time to read through the safety notices before installing the print server. Please observe all safety markings and instructions when using this product. Observe "Important:" in the text to avoid operational impairment. Do not proceed until you have fully understood the implications. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] It is not possible to print a test page on Canon printers supporting Canon Advanced Printing Technology and Canon Advanced Raster Printing System. Underneath the printer icon is a colored symbol that indicates the status of the printer: System Location Serial Number Language Printer Page · · · green indicates that the printer is ready for printing yellow indicates warning red indicates error A dimmed printer indicates that no printer is connected to that port. Printer Status The Printer page shows status and capabilities of the printer that is connected to the selected printer port. The capabilities include Detailed Status, Manufacturer, Command Sets and Capabilities. The extent of this information depends on the printer model. Click Network Names to see a list of names that the printer is identified with in the supported network environments. Network Names 42 AXIS 1650 User's Manual Print Server Management and Configuration Print Jobs Select Print Jobs to view Printer Usage, showing the accumulated usage of the printer connected to your print server. The Printer Usage log is erased each time the print server is restarted. · · · · Printer - shows the printer model. Port - shows the port to which the printer is connected. Status - shows the status of the printer. The available status messages are ready, busy and off-line. Printed Pages - shows the number of pages that the printer has printed (not shown for all printer models). View Job Log Presents the 32 latest print jobs as Document Name, Owner, Page Count, Time and Print Results. Note that the time when the document was printed is only available if the print server has access to a time server. Shows the time elapsed since last time the print server was restarted. Shown for multifunctional Canon devices with scanning capabilities. If the scanner is in use, its status will change from Idle to Busy and the User name will be shown. Print Server Uptime Scanner Help The Help pages present basic information about the AXIS 1650 and its Web user interface. AXIS 1650 User's Manual 43 Print Server Management and Configuration Services Available from the Admin Mode Click on the Axis logotype to reach Axis' home page. A click on the question mark will open the print server's help pages. The following services are available from the Admin mode. This Print Server This page contains a section that allows you to view and modify the general parameter settings of the AXIS 1650. Management operations, like restarting the AXIS 1650 and resetting its parameters to their default settings are also available. This name identifies the print server to the users. The default name is AXISXXXXXX, where XXXXXX are the last six digits of the print server's serial number. This parameter shows where the print server is located, helping you to find the Canon device you are working with. [. . . ] Use Ethernet II frame type, full duplex. RJ-45 connector (Category 5 shielded twisted pair cable) for 10baseT Ethernet or 100base TX Fast Ethernet. · One Low- and Full-Speed USB 1. 1 port, and works with USB v 2. 0 (Low-Speed and Full-Speed). The USB cable shipped with the product supports Low-Speed and FullSpeed. [. . . ]