User manual B&K REFERENCE 30

[. . . ] Reference 30 A/V System Controller Owner's Manual p/n 12857 Rev. 0717A USER INFORMATION Model # Serial # Date purchased Purchased from: City State Phone Contact 1 2 3 4 5 SETUP SPEAKER SIZE Front Center Surround Surround Back Subwoofer next item adjust MENU setup speakers 1 2 3 4 5 6 7 8 SPEAKER LOCATION feet Left Front Center Right Front Right Surround Right Surr Back Left Surr Back Left Surround Subwoofer next item adjust MENU setup speakers 1 2 3 4 5 6 7 8 SETUP SPEAKER LEVELS Left Front Center Right Front Right Surround Right Surr Back Left Surr Back Left Surround Subwoofer next item adjust MENU setup speakers dB dB dB dB dB dB dB dB 1 2 3 4 5 6 7 SETUP CROSSOVERS + LFE Crossover Hz High Pass dB Low Pass dB Peak Limiter dB LFE Level dB DTS LFE Mode Subwoofer Phase next item adjust MENU setup speakers SETUP ROOM EQUALIZATION Test Tone 20 Hz Off Notch Hz dB Notch Width Hz Bass Hz dB Treble Hz dB next item adjust MENU setup speakers B&K Components, Ltd. , 2100 Old Union Road, Buffalo New York 14227-2725 Phone (716) 656-0026, Fax (716) 656-1291, http://www. bkcomp. com, E-mail: info@bkcomp. com p/n 12857 Rev. 0717A TABLE OF CONTENTS Acknowledgments . 17 Surround Speaker Output Connections . [. . . ] EXIT (remote only) - From the remote control you may instantly EXIT the menu system. UNIVERSAL REMOTE - Remember that when you press a source button (DVD, CD, etc. ) the remote now controls the selected device. To return control to your processor, you must press B&K or AUDIO. ALWAYS check that your remote is set to B&K or (AUDIO) before attempting to control your processor. B&K or (AUDIO) will be displayed in the remote's LCD window. 22 p/n 12857 Rev. 0717A SYSTEM SETUP You should always perform System Setup after first installing your processor and after adding/changing speakers or sources or rearranging your listening area. Check that the remote is in B&K mode. From Remote 1 B&K or POWER 2 MENU 3 (PAUSE) or V(STOP) 4 SEL or ENTER From Front Panel Action turn on processor activate menu system move to System Setup activate SETUP SYSTEM A SLEEP MENU (UP) or (DOWN) (ENTER) 1 2 3 4 5 6 MAIN MENU Zone 1 Operation Zone 2 Operation Zone 1 Favorite Presets Zone 2 Favorite Presets System Setup Memory Backup/Restore next item MENU SEL select exit menu system 1 2 3 4 SETUP SYSTEM Speakers Displays Inputs Presets next item SEL select MENU main menu 6<67(0 6(783 6(783 63($. (56 From Remote 1 (PAUSE) or V(STOP) 2 SEL or ENTER From Front Panel (UP) or (DOWN) Action move to Speakers activate SETUP SPEAKERS (ENTER) Speakers The speakers menu lets you tell your processor how many speakers you have in your system, the relative size of the speakers, and their location in the room. This is the most important setup procedure you will perform. The processor comes from the factory setup for 7 small speakers and a subwoofer. If this does not match your speakers then audio information will be lost. For example, if you do not currently have a center channel speaker and you do not perform this setup procedure, the center channel information will be lost. If you perform this setup correctly, the processor will know that you have no center channel speaker and send this information to your front left and right speakers (along with the normal front left and right information) so no audio information is lost. Speaker Size Speaker size generally refers to the size of your speakers. Audio material, particularly Dolby Digital and DTS movies, often contain large amounts of bass. If this bass information is sent to small speakers that are incapable of reproducing so much bass, then the bass information will be lost or distorted. MANY SMALL SPEAKERS MAY BE DAMAGED BY TOO MUCH BASS. By telling your processor the size of your speakers, it will be able to intelligently route the bass to speakers that can reproduce it correctly. Typically, all bookshelf or satellite speakers are considered small. Smaller floor standing speakers with single woofers 8" or less should also be considered small. Floor standing speakers with 10" or larger woofers or multiple smaller woofers may be considered large. These are general guidelines only - if you are unsure consult your speaker manufacturer or check with the dealer if they are unsure. If you have all small speakers we strongly recommend use of a subwoofer. [. . . ] This warranty does not apply to the cabinet, the remote controller, or appearance items such as the faceplate, control buttons, or display lenses, nor does it cover any expenses incurred in shipping the unit to and from the manufacturer's service depot. No warranty, implied or otherwise created by State law shall extend beyond the terms of this warranty and B&K shall not be liable for any incidental or consequential damage arising out of a defect in material or workmanship of the unit during the terms of this warranty or thereafter. Some States do not allow the exclusion or limitation of incidental or consequential damages and the foregoing exclusions may not apply to you. This warranty gives you specific legal rights. [. . . ]