User manual B&W DM 3000

[. . . ] Ask your dealer for advice when choosing cable. Keep the total impedance below the maximum recommended in the specification and use a low inductance cable to avoid attenuation of the highest frequencies. Please read this manual fully before unpacking and installing the product. [. . . ] It will help you to optimise its performance. B&W maintains a network of dedicated distributors in over 60 countries who will be able to help you should you have any problems your dealer cannot resolve. Before fine tuning, double check that all the connections in the installation are correct and secure. Moving the speakers further from the walls will reduce the general level of bass. Space behind the speakers also helps to create an impression of depth. Conversely, moving the speakers closer to the walls will increase the level of bass. If the bass is uneven with frequency it is usually due to the excitation of resonance modes in the room. This guarantee complements any national/regional law obligations of dealers or national distributors and does not affect your statutory rights as a customer. We suggest you retain the packing for future use. The stand or shelf used can affect the sound quality of the speaker. Ask your dealer for advice on the best type for your needs. 5m apart to maintain left-right separation. If you wish to use an aerosol cleaner, remove the grille first by gently pulling it away from the cabinet. Spray onto the cleaning cloth, not directly onto the cabinet. [. . . ] Spray onto the cleaning cloth, not directly onto the cabinet. The grille fabric may be cleaned with a normal clothes brush whilst the grille is detached from the cabinet. Avoid touching the drive unit diaphragms, especially the tweeter, as damage may result. [. . . ]