Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BABY JOGGER CAR SEAT ADAPTER KIT. We hope that this BABY JOGGER CAR SEAT ADAPTER KIT user guide will be useful to you.
Lastmanuals help download the user guide BABY JOGGER CAR SEAT ADAPTER KIT.
Manual abstract: user guide BABY JOGGER CAR SEAT ADAPTER KIT
Detailed instructions for use are in the User's Guide.
[. . . ] C) Note: The Red compression locks and the support bars are not applicable when using the Baby Jogger Pram 4. To remove Pram from the Adapter Brackets, press the two buttons on the Pram handle and lift up carefully. To retract canopy, push button on canopy hinge and push canopy back out of the way. To use canopy in the extended position, push button and pull canopy forward. [. . . ] Adjust U-Shape Support Bar to proper length by sliding U-Shape Support Bar in and out. C) Close compression locks by flipping the Red latches down. Secure the car seat to stroller using Safety Belt. F)
3
Graco/Evenflo Car Seat
To install a Graco/ Evenflo car seat you will need the following adapter part(s): 2 Adapter Brackets (1 left, 1 right) 1 U-Shaped Support Bar
1. Remove the canopy and seat from stroller frame. (Be sure to store fabric and hardware for later use. ) 2. Secure Right Adapter Bracket to frame directly below the folding mechanism making sure to align the notches in the Adapter Bracket over the snap and rivets. Over tightening will damage the product and void the warranty. Open the compression locks by flipping the Red Latches up to allow U-Shape Support Bar to be inserted into Adapter Brackets. Insert the U-Shaped Support Bar with the curved end pointing up into the Adapter Brackets. Place car seat onto U-Shaped Support Bar. Adjust U-Shape Support Bar to proper length by sliding frame in and out. Close compression locks by flipping the red latches down. Secure the car seat to stroller using Safety Belt. F)
Note: The Straight and Spring Support Bars are not applicable when using a Graco or Evenflo car seat.
4
(Fig. F)
5
Britax Companion Car Seat
To install the Britax Companion car seat you will need the following adapter part(s): 2 Adapter Brackets (1 left, 1 right) 1 U-Shaped Support Bar 1 T-Shaped Support Bar
1. Remove the canopy and seat from stroller frame. (Be sure to store fabric and hardware for later use. ) 2. [. . . ] (Be sure to store fabric and hardware for later use. ) 2. Secure Right Adapter Bracket to frame directly below the folding mechanism making sure to align the notches in the Adapter Bracket over the snap and rivets. Over tightening will damage the product and void the warranty. Place car seat onto the Adapter Brackets, making sure the child will be facing toward stroller handle. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BABY JOGGER CAR SEAT ADAPTER KIT
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BABY JOGGER CAR SEAT ADAPTER KIT will begin.
