User manual BABYLISS 889 CASQUE

[. . . ] ASSEMBLY INSTRUCTIONS The BaByliss Super Hood requires careful assembly before use. please read the following Assembly instructions carefully: 1. Slide the non-weighted foot into the extended base socket (1) until it clicks home. Insert the 30mm screw (provided) into hole under base and tighten to secure foot. [. . . ] € Select one of the 3 heat levels using switch located on the side of the hood. Position III: For rapid drying or starting the drying process or for thick/long hair Position II: For normal drying Position I: Cool setting for finishing the style Start with III or II and end with I 1. Prepare your hair for drying in your usual way e. Make yourself comfortable under the hood dryer. Pull down the front visor: this will automatically switch the dryer on. Some styles require a greater airflow on the top of the head, whilst others (e. Long hair) require the airflow to be directed around the sides. To give this flexibility, the Super Hood Dryer is fitted with an adjustable diffuser. To operate this, there is a slide-switch situated on the inside front edge, underneath the hood. When you want to stop the dryer, simply lift the front visor until it is held in 6 position. NB: Always ensure that the dryer is switched to the off position (using the side switch) after each use. CLEANING Use only a soft, damp cloth with mild detergent and always ensure that the dryer is fully dry before use. CAUTION • Do not immerse in water or other liquids and do not use near basins or other vessels containing water. € Unplug the hairdryer after use since the proximity of water can be dangerous even if it is switched off. For additional protection the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. • Store out of children’s reach. € Always unplug the appliance when not in use . Do not leave unattended when switched on. € Take care to avoid contact between the hot surfaces of the appliance and the face or neck. € Always ensure the voltage to be used corresponds to the voltage on the unit. [. . . ] In everybody's interest and to participate actively in protecting the environment: • Do not discard these items with your household waste. • Use the available trade-in and collection systems. Some materials can in this way be recycled or recovered. Ledningen skal udskiftes af producenten, dennes serviceafdeling eller en person med lignende kvalifikationer for at undgå enhver risiko for brugeren. [. . . ]