User manual BABYLISS G490E ISYLISS

[. . . ] ENGLISH ISYLISS PLUS For almost 30 years, BaByliss has been responding to the women’s desires for hair removal systems. Your new Isyliss is the result of BaByliss’s advanced research. €  ffective, its epilation head removes hair with the hair bulb. [. . . ] Before P using Isyliss for the first time, allow it to charge for 16 hours. Make sure the epilator’s switch is in the OFF position.  heck that the charging indicator light is lit. S MAINS USE Connect the adapter into the mains, wait 1 minute and then switch into the ON position. Use only the adapter provided with the epilator.  urn the appliance on and select speed I or II.  old the appliance at an angle of 90 degrees to the surface H of where hair is to be removed.  lways work with both hands: carefully stretch the skin with A one hand while moving the appliance with the other. Only move your epilator against the direction of the growth of your hair. lowly move the epilator, while pressing down lightly. S Careful not to press the appliance down too hard against your skin; it might slow down and be less effective. Removing hair from sensitive areas: To remove hair from sensitive areas, we recommend putting the accessory for sensitive areas on the head of your epilator. It reduces the number of hair remover disks so that you can remove hair more smoothly and with greater precision. If your hair is long (longer than 1 cm), we recommend cutting it with scissors before using your epilator, preferably set at speed I.  o remove hair from your underarms, move the appliance T using an upwards motion, then a second time using a downwards motion.  o remove hair from your bikini line, carefully stretch your T skin and move the appliance working from the outside in. [. . . ] Never immerse the appliance in water entirely. €  f the body of the appliance needs to be cleaned, use a cloth I moistened with soft detergent.  hastigheter - hastighet I for følsomme områder, hastighet 2 II for benene 3. [. . . ]