User manual BABYMOOV BABYPHONE AUDIO GREEN DIGITAL

[. . . ] Nom : Mr Laurent Windenberger Fonction : Directeur marketing Signature : Date : 10/10/12 COMMANDES - CONTROLS - STEUERUNGEN - BEDIENING MANDOS - COMANDOS - COMANDI - OVLÁDÁNÍ PŘÍSTROJE Émetteur - Transmitter - Sender Zender - Transmisor - Emissor Trasmettitore - Vysílač Récepteur - Receiver - Empfänger Ontvanger - Receptor - Receptor Ricevitore - Přijímač 3 BABYPHONE DIGITAL GREEN Écran du récepteur - Parent unit (PU) LCD screen - Elterneinheit (PU) LCD Display Ouderunit (PU) LCD scherm - Pantalla LCD de la unidad parental (UP) - Visor LCD Unidade pais (PU) Display LCD Unità genitori (UG) - Displej LCD jednotky Rodi e (PU) Écran de l’émetteur - Baby unit (BU) LCD screen - Babyeinheit (BU) LCD Display Baby unit (BU) LCD scherm - Pantalla LCD de la unidad del bebe (UB) - Visor LCD Unidade Bebê (BU) Display LCD Unità bimbo (UB) - Displej LCD jednotky Dít (BU) 4 BABYPHONE DIGITAL GREEN FR NOTICE D’UTILISATION Merci d'avoir choisi notre babyphone Digital Green. 12 BABYPHONE DIGITAL GREEN • Notice d’utilisation EN INSTRUCTION MANUAL Thank you for choosing our Baby monitor Digital Green. We recommend you read these instructions carefully in order to use your Baby monitor to best advantage and ensure it continues to operate as long as possible. If you should find a fault, however, or if you have any problem, please contact our company. [. . . ] If you continue to press the button once the minimum or maximum level is reached two beeps sound. Once the transmitter starts to transmit the screen lights up and the transmission icon appears . A few seconds after the microphone (7) stops receiving the sounds the appliance goes back into stand-by mode and the transmission icon disappears . The screen also switches off to save energy. This babyphone is equipped with a “Baby Answering” function; it lets the parents talk to their child. The sound level of the voice of the parents can be adjusted. Keep the “Volume” button (5) down and press the buttons (2) (3) ▲▼ to adjust the volume of the speaker (8). On the screen the number of bars indicating the volume also changes depending on the level chosen. When it is set to minimum the sound of the speaker is cut completely. The nightlight (6) can be lit continuously by setting the start/stop switch (1) in position , the nightlight icon then appears on the screen . The nightlight (6) can also be set to VOX (voice activation) by briefly pressing the “Menu” button (4): the VOX symbol appears next to the icon . In VOX mode the nightlight (6) scomes on when the microphone detects a sound and then automatically goes off when it no longer senses any sound. Briefly press the “Menu” button (4) to switch into VOX mode in continuous mode. You also have the possibility of controlling the nightlight (6) remotely from the receiver: refer to the latter’s Functioning section. The batteries’ status is shown by the charge status indicator . As the charge of the batteries goes down the bars in the indicator progressively go out. The charge status indicator also appears on the receiver screen: you can monitor the batteries’ charge at a distance. An alarm goes off on your unit as soon as the indicator is empty . A beep sounds every time you press a button; it means the appliance has taken your action into account. Switch the start/stop switch (11) to ON to switch on the LCD screen. Keep the “Menu” button (14) down for at least 5 seconds to have access to the programming mode. This is what is displayed on the screen: ■ STEADY ■ FLASHING or BABYPHONE DIGITAL GREEN • Instruction Manual 17 b. [. . . ] € Activate the alert on both appliances. € The temperature alarm does not switch off . € The maximum and minimum temperatures defined are too close to the ambient temperature. € Adjust the maximum and minimum temperatures: they must be about 5 °C above and below the temperature displayed on the appliance. [. . . ]