User manual BALANCE KH 2113 PROFESSIONAL HAIR DRYER

[. . . ] To disconnect, pull only on the plug itself, not on the cable. Do not wrap the power cable around the Professional Hair Dryer and protect it from damage. To avoid injury, arrange for damaged power cables to be exchanged by specialists before re-using the appliance. Do not pinch or squeeze the power cord and lay it in such a way that no one can tread on or trip over it. [. . . ] Should you do so, the safety of the device may be compromised and the warranty becomes void. Do not cover the air suction grill while operating the appliance. Hold it only by the grip when it is hot. The Professional Hair Dryer is intended only for the drying and shaping of human hair, under no circumstances is it to be used for wigs and hairpieces made of synthetic material. You may use it exclusively in domestic households. Pay heed to all of the information in this operating manual, especially the safety instructions. Blower levels 0 The Professional Hair Dryer is switched off 1 reduced air flow 2 full power air flow Heat levels 1 Cold air flow 2 Low heating level 3 High heating level With the cool level switch "Cool-Shot" u you can produce a cooler air flow with every combination of blower and heat levels. Switch the appliance off after use, in that you place the blower switch t into position "0". Then remove the plug from the wall socket. Q Styling Jet w Filter element e Air suction grill r Suspension lug t Blower level switch (2 levels) y Heat level switch (3 levels) u Cool level switch ("Cool-Shot") i Finger Diffusor To quickly dry hair, we recommend first of all Using a high blower and heater setting for a short period. afterwards , place the settings at a lower level to shape and form the hair. With the enclosed styling jet q, which can be turned into all positions, you can use the air flow directly for styling. If you wish to dry your hair particulary gently, or for the so-called "air-dryed permanent wave", use the finger diffusor i. For this, first of all remove the styling jet q, then replace it with the finger diffusor. Before you comb your hair out allow it to cool, so that the styling retains its form. For cooling the hair you can use the switch "Cool-Shot" u or level 1 of the blower switch y settings. With these you can separately select the strength of the air flow (Blower switch t) and the amount of heat (Heat level switch y): First pack and transport the Professional Hair Dryer when it has completely cooled down. Should your Professional Hair Dryer not function as expected, first remove the plug from the wall socket and allow the appliance to cool down for a few minutes. the appliance is fitted with an overheating protector!Should the appliance still not function when cooled down, consult the service. [. . . ] This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warranty, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. [. . . ]