User manual BALANCE KH 5525 HAIR STRAIGHTENER

[. . . ] In event of operating malfunctions and before cleaning the appliance, remove the power plug from the wall socket. Disconnect the appliance by pulling on the plug, not on the power cable. Do not wrap the power cable around the appliance and protect it from being damaged. To avoid risks, arrange for defective power cables and/or plugs to be replaced immediately by qualified technicians or our Customer Service Department. [. . . ] Turn the screws so far into the wallplugs that ca. 5 mm of the screwshafts continue to be exposed. Place the combination mounting a over the screws so that they protrude through the securing holes u. Press the combination mounting a down so that the screwshafts are now in the narrow part of the securing holes u. The hair should be clean, dry and free of styling products. Comb the hair thoroughly before straightening so that there are no knots in it. To achieve an especially good straightening result, spread special products for hair straightening through the hair. Divide the hair into manageable portions and secure the upper portions to the head with grips so that they do not get in the way. Open side at the front in the guide rail on the hair straightener until it audibly engages. Use the same procedure with the second ceramic plate t/y. The given heating-up times are guiding figures. They can vary, subject to other influences. Heating level 1 Heating level 5 Heating level 10 Heating level 15 Heating level 20 Heating level 25 In all cases the ceramic plates t/y MUST be cooled down before they are exchanged. Remove the power plug e from the wall socket. Use the same procedure with the second ceramic plate t/y. NEVER wrap the power cable with plug e around the appliance. The ceramic plates t/y must be free of contamination. If necessary, clean them before taking them into use (see chapter , , Cleaning"). Insert the power plug e into a wall socket. ALWAYS remove the power plug e from the wall socket when the appliance is not in use and is being stored in the combination mounting a. Always place the appliance in the hair straightener retainer i to cool down. Temperature from level 1: fine hair · Temperature from level 10: average strength hair · Temperature from level 20: strong or difficult to straighten hair Prepare the hair as described in "Before straightening". [. . . ] Please keep your receipt as proof of purchase. Contact your service centre by telephone in case of questions pertaining to the warranty. Your goods can be transmitted free of cost only in this manner. The warranty covers only material or manufacturing faults, not normal wear or damage to fragile parts such as switches or rechargeable batteries. [. . . ]