User manual BALAY 3HF506XP

[. . . ] Table of contents Important information . Function selector (depending on model) . Temperature selector (depending on model) . 5 5 6 6 7 7 8 8 9 9 11 13 Before using for the first time . [. . . ] Press the j button twice and switch off the function selector. 16 Note You can change the setting while the symbol is flashing. The setting has been adopted if the symbol lights up permanently. You may change the waiting time that elapses before the setting is adopted. See the Basic settings section for more details. Time When the oven is first connected, or following a power cut, the j symbol and three zeros flash in the display. The function selector must be switched off. Setting procedure Example: 13:00 1. Press the j clock button. 12. 00 appears in the display and the j symbol flashes. 2. Set the time using the + or - button. The time selected is adopted after a few seconds. Changing the time e. g. from summer to winter time Press the j clock button twice and change the time with the + or - button. 17 Hiding the time You can hide the time. It will then only be visible when you are performing settings. To do this, you must change the basic setting. See the Basic settings" section. Timer You can use the timer as a kitchen timer. This means that you can tell whether the set timer period has elapsed or the cooking time is complete. You can also set the timer if the childproof lock is active. Setting procedure Example: 20 minutes 1. Press the a timer button. The a symbol will flash. 2. Set the timer period using the + or - button. + button default value = 10 minutes. - button default value = 5 minutes. The timer starts after a few seconds. The time counts down visibly. 18 The time has elapsed Changing the timer period Cancelling the setting The timer and cooking time count down simultaneously A signal sounds. Change the time using the + or - button. Press the - button until the display is at zero. The timer period counts down visibly in the display. To call up the remaining cooking time ?, end time ?or time j: Press the j clock button until the symbol in question flashes. [. . . ] Remove the tea towel and connect the appliance from the mains. 26 Replacing the glass cover The glass cover on the oven light must be replaced if it is damaged. Replacement glass covers may be obtained from the after sales service. To this end, please specify the E number and FD number of your appliance. After sales service Our after sales service is there for you if your oven needs repairing. You will find the address and telephone number of your nearest after sales service centre in the phone book. The after sales service centres listed will also be happy to advise you of a service point in your local area. [. . . ]