User manual BALAY 3TI60081A

[. . . ] Installation and operating instructions en Washing machine Please read the installation and operating instructions and all the other information supplied and handle the appliance accordingly. Keep all documents in a safe place for future reference, or to pass on to the next owner. For further information and a selection of our products, visit our website: http://www. balay. es Table of contents Operating instructions General safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Environmental protection/economy tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] inicio/pausa (Start/Pause) button until all three programme progress lights light up. inicio/pausa (Start/Pause) button for three seconds. For washing programmes at high temperatures: ­ Cooling the laundry: select O/C (Rinse + Spin). For programmes with a low temperature: ­ Select O/C (Rinse + Spin) or (Empty). inicio/pausa (Start/Pause). Programme termination t/D Reset function ­ You can use the Reset function to return to the original settings. inicio/pausa (Start/Pause) button until all three programme progress lights light up. 14 Cleaning and care Safety information Risk of electric shock. The appliance must first be disconnected from the mains. Never clean the washing machine with a jet of water. Risk of explosion Never clean the washing machine with solvents. Risk of scalding Hot detergent solution must be allowed to cool before being drained. Housing and control panel Washing drum ­ Remove detergent residues immediately. ­ Wipe away with a soft, damp cloth. ­ Cleaning with a jet of water is prohibited. ­ Remove any foreign bodies from the drum and rubber seals. ­ Leave the loading door open in order that drum can dry. ­ Use chlorine-free cleaning agents. Follow the information provided by the manufacturer. Never use steel wool. Detergent drawer If there are detergent or care product residues: Pull out the detergent drawer as far as the stop. Press on the zone marked PUSH and take out the detergent drawer. Remove the fabric softener compartment insert. Clean the detergent drawer and fabric softener compartment insert under running water. Insert the fabric softener compartment insert. Not necessary if the correct measures of detergent are used but, if still required, follow the information provided by the descaler manufacturer. Suitable descalers can be ordered via our website or from our after-sales service page 21. Descaling the washing machine 15 Detergent solution pump Notes on blockages Set the programme selector to stop (Off). [. . . ] ­ N. B. : The screw connection is under mains water pressure. Water outlet Drainage into a siphon ­ Do not kink the outlet hose or pull it lengthways. ­ Height difference between the installation surface and the drain: max. Secure the connection point with the 24-40 mm hose clamp. Electrical connection The washing machine must only be connected to an alternating current via a properly installed earthed socket. Only use earth-leakage circuit breakers with the following symbol: The mains voltage must correspond to the voltage specifications on the washing machine (rating plate). [. . . ]