User manual BALTUR BTG 11 SCHEMA

[. . . ] The works on the burner and on the system have to be carried out only by competent people. [. . . ] NOTE: this declaration is not valid with regard to EC or UNI Standards for gas burners or the gas part of duel-fuel burners (gas/light oil or gas/heavy oil) when such burners have been ordered in non-compliance with the EC Standard or Italian UNI Standard because they are to be used for special purposes not provided for in the abovementioned standards. " - General diagram for pressure reduction - Operation problems . Disk head position reference Adjustable screw for air damper opening 7-pole connector Control box Combustion head Insulating gasket Burner mounting flange Motor Air pressure switch 10) Disk head regulating screw 11) Gas valve monobloc 12) Minimum air pressure switch Eventuale collegamento fase gas di emergenza eventual emergency gas phase connection eventuel branchement d'urgence à la phase gas eventueller notanschluss an die gasphase eventual conexión de emergencia a la fase gas gruppo riduzione 1° salto 1st stage reducer unit groupe reduction 1er ressaut verminderungsaggregat 1. - The vaporizer is considered a dangerous point and should therefore be situated at a safe distance from any building. [. . . ] It is advisable to make all the connections with flexible elecric wire. [. . . ]