User manual BALTUR EMME 385 TOP-6EL SCHEMA

[. . . ] More entry history or menus are available. An entry extends beyond the capacity of the display. Press!or"to scroll. General Information The EMME 385 TOP-6EL has two power sources — battery and solar. It operates in well-lit areas using the solar cell, and it operates in other light settings using the battery. [. . . ] to select the level of difficulty (1, 2, or 3). Press ® ‡, and the EMME 385 TOP-6EL will present problems at the selected level. Or, while in ‹mode, press c to advance to the next level. After Level 3, pressing c again returns you to Level 1. While in ‹ AUTO mode, press ‡ $$ to access the menu. to select the type of problem — addition (+), subtraction (N), multiplication (x), division (P), or find the operator (?). Press ® ‡, and the EMME 385 TOP-6EL will present problems of the selected type. Procedure. If your answer is correct, the display shows YES, clears the screen, and presents another problem. If your answer is not correct, the display shows no and indicates whether the correct solution is less than < or greater than > the answer that you entered. The incorrect answer is cleared from the display so you can enter another answer to that same problem. If you enter three incorrect answers to a given problem, the EMME 385 TOP-6EL shows the correct answer, clears that problem, and presents a new problem. ¦ When the answer to a problem is not a positive integer (such as 9P2), the EMME 385 TOP-6EL indicates that the problem has zero solutions. The computation with the stored operation appears in the first line of the display, and the result appears in the second line. Press ‡ $ " (to underline ?, if necessary) ® . Press ‡ again to return to the stored operation. If the expression does not fit on the line, it will not show. When display space permits, a counter on the second line shows how many times you have pressed ›. Press ” or ‡ to return to the last result display. Resetting the EMME 385 TOP-6EL also clears Op1. Press ® . Rounding Š‘’“˜™ You can round results using Š in conjunction with the Place Value keys to specify a given number of places. The internally stored value is not rounded. The calculated value is padded with zeros as needed. You must press Š each time you want to change the number of places. Keys Š  Š ‘ Š ’ Š “ Š ˜ Š ™ Š r Action Rounds to thousands. [. . . ] The answer appears briefly and then clears so you can press another digit or Place Value key. TI Product Service and Warranty Information For General Information E-mail: Phone: ti-cares@ti. com 1. 800. TI. CARES (1. 800. 842. 2737) For U. S. , Canada, Mexico, Puerto Rico, and Virgin Islands only education. ti. com 1. 972. 917. 8324 Home Page: Phone: For Technical Questions For Product (hardware) Service Customers in the U. S. , Canada, Mexico, Puerto Rico and Virgin Islands: Always contact Texas Instruments Customer Support before returning a product for service. All other customers: Refer to the leaflet enclosed with this product (hardware) or contact your local Texas Instruments retailer/distributor. Once Place Value is active, it is not necessary to press Œ before each digit or place that you wish to examine for a given number. You must press ” before entering a new number to analyze. Then you must activate Place Value again by pressing Œ. [. . . ]