User manual BANG & OLUFSEN BEOCOM 2

[. . . ] BeoCom 2 Guide Before you start. . . BeoCom 2 BeoCom 2 Getting started Guide Get started contains instructions in how to set up the BeoCom 2 for use with a BeoLine ISDN, BeoLine PSTN, or BeoCom 6000 base. The Guide contains instructions in daily use of BeoCom 2. ISDN and PSTN are two telephone line networks. PSTN (Public Switched Telephone Network) is the most common network. [. . . ] > Press OK to store the selected number. First select which sound source, audio or video, you wish to adjust. If you have a Bang & Olufsen BeoLink® system installed, you can also adjust the volume in a link room. AV Video AV Audio Adjust the volume of an Audio, Video or Link system. . . > Press AV repeatedly to select the sound source to be adjusted, `Audio', `Video', `Link Audio' or `Link Video'. The sound source which you last adjusted is shown as the first option on the display. > Push the Track point up or to the right to increase the volume. Push the Track point to the left or down to decrease the volume. To be able to adjust sound with BeoCom 2, you must be in the same room as the sound source, regardless of whether it is in the main room or a link room. Audio Audio System use with several handsets 17 With several handsets registered to one base, you can make your own phone system. Handsets in the system are numbered 1­6 and can be named as well. You can make an internal call to a specific handset or to all handsets. The handsets can all receive external calls, also during internal calls, provided you have more than 2 handsets. You can also make a three-party call with one internal and one external party. 18 Call another handset You can call one handset or all handsets simultaneously. If you call all handsets, the handset that responds first receives the call. If you call one handset, the display shows which handset has been called. The phone system allows up to 2 internal calls and 1 external call to take place at the same time. INT 1: Kitchen Call? Call a handset. . . > Press INT to make an internal call. > Use the Track point to search through the internal listing of handsets. The handset number is shown, along with any stored name. > Press INT to make an internal call. > Use the Track point to search through the internal listing of handsets until `All' is shown. > Press to end a call Alternatively, you can call a handset by pressing INT, followed by the number of the handset or for all handsets. If you misplace a handset, you may be able to locate it by making a call to that handset. 2: Living room Call? *: All Call? OK 1: Kitchen 0:20 Forward external calls 19 You can forward an external call to one handset or to all handsets. [. . . ] Give the handset a new name and register it to an open base. You can also cancel the registration of other handsets to the base. Cancel registration of a handset in the system or change the PIN code for the base. You can select the language of the display texts. [. . . ]