User manual BANG & OLUFSEN BEOLAB 3500

[. . . ] BeoLab 3500 Guide CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To reduce the risk of electric shock, do not remove cover (or back). Refer servicing to qualified service personnel. WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. [. . . ] Balance can be adjusted within a range of 7 to either side. BASS 0 The current bass level ­ here neutral. Bass can be adjusted within a range of -7 to +7. TREBLE 0 The current treble level ­ here neutral. Treble can be adjusted within a range of -7 to +7. LOUDNESS The display shows the current loudness setting ­ shining steadily for `on', blinking `LOUDNESS' and `OFF' for `off'. 12 Make a Wake-up Timer A Wake-up Timer is a once-only Timer, and is deleted once it has been executed. You can also delete a Wake-up Timer yourself. Choose the time and a specific source, such as CD, for your Wake-up Timer. Unless you specify differently, the Wake-up Timer starts on the last played radio station. To make BeoLab 3500 wake you up every morning, for example, program your main audio or video system for Timer Play. For further information, refer to the Guide included with your main system ­ and to page 7 in this Guide. To make a Wake-up Timer . . . > Press the button for the source you wish to use, such as RADIO or CD. If you choose CD as your source, make sure that a CD is loaded in the audio system. > If necessary, use the number buttons to enter a program number and press GO. > Using the number buttons, enter the wake-up time. > If you change your mind, press EXIT to cancel the Wake-up Timer. > . . . press GO to store the Wakeup Timer. Once you have made one Wake-up Timer, BeoLab 3500 automatically suggests the time you entered for the last Wake-up Timer in the display, when you start to make a new timer. To delete a Wake-up Timer . . . > Press MENU to view your Wakeup Timer. > Press GO to confirm. 13 Information in the display ON ­:­ ­ BeoLab 3500 is ready for you to key in a time for your Wake-up Timer. STORED You have now stored your Wakeup Timer. DELETED You have now deleted your Wakeup Timer. ILLEGAL The time you entered is not correct, simply key in a different time. About the Wake-up Timer and Timer Play A Wake-up Timer you make on BeoLab 3500 may overrule a Timer Play you have programmed on your main room system. [. . . ] The entire system must be switched to stand-by. > While holding down the · button, press LIST. > Press LIST repeatedly until OPTION?is shown in the Beo4 display, and press GO. [. . . ]