User manual BARNETT CROSSBOWS RHINO CRANK COCKING DEVICE

[. . . ] RHINO CRANK COCKING DEVICE ASSEMBLY AND OPERATING INSTRUCTIONS 1. Remove the butt plate on the rear stock of your Rhino by removing the two Phillips head screws. Insert Rhino Crank Device unit on the rear stock of Rhino. [. . . ] This may cause severe damage to your bow or personal injury. -------------------------------------------------------------------------------------------Barnett International Inc. Warranty Registration on opposite side *** DO NOT TURN THE HANDLE BACKWARDS WHILE DRAWING THE BOW!THIS WILL DAMAGE THE ROPE*** The latch mechanism should always be engaged when cocking the crossbow. An audible clicking sound should be present while turning the handle in a forward rotation. If this clicking sound is not present, pull latch release down to engage. If the clicking sound is still not present, improper installation may have occurred. Re-check installation and contact the Barnett Service Department at 1-800-237-4507. Note: The Crank Cocking Device cannot be turned in reverse while the latching mechanism is engaged. Once the crossbow is cocked, the latch must be disengaged so that the string hooks can be removed from the string. Always leave the latch mechanism engaged when the crossbow is not in use. Uncocking the Crossbow Do not uncock the crossbow with the Crank Cocking Device. This could cause injury and damage to your crossbow. The best way to uncock a crossbow with a Crank Cocking Device attached is to shoot an arrow into the ground. You may want to keep an old arrow in your quiver at all times for this purpose. BARNETT INTERNATIONAL INC. LIMITED WARRANTY The Crank Cocking Device is guaranteed to the original purchaser to be free of manufacturing defects for a period of one year from date of purchase. Our liability extends to parts, labor and return transportation to consumer. [. . . ] There are no other warranties expressed or implied. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. Cut Out and Mail Immediately Barnett International Inc. , PO Box 934, Odessa, FL 33556 CRANK COCKING DEVICE WARRANTY CARD NAME:_____________________________________________________________AGE_______________ ADDRESS:___________________________________________________________________________________ CITY:_______________________________STATE___________________ZIP____________________________+ DATE OF PURCHASE_________________________-PHONE_________________________________________ DEALER_____________________________________PRICE PAID_____________________________________ DEALER ADDRESS:___________________________________________________________________________ TYPE OF STORE: GUN SHOP ( ) DEPT. STORE ( ) SPORT STORE ( ) MAIL ORDER ( ) OTHER ( ) PLEASE SPECIFY______________________ REGISTRATION NO. [. . . ]