User manual BARRACUDA NG FIREWALL QUICK CONFIGURATION GUIDE

[. . . ] NG Firewall 1 Barracuda NG Firewall - Quick Configuration Guide Please follow the instructions as given in points 1 to 4 in the "Barracuda NG Firewall - Quick Start Guide" for setting up and connecting to the appliance before proceeding with the next steps. The "Barracuda NG Firewall - Quick Start Guide" comes with every Barracuda NG Firewall appliance and is available for download from www. barracudanetworks. com in the Barracuda NG Firewall product section. As indicated above, activation of this default configuration requires some manual steps. A description of these steps is given below. [. . . ] If this rule is not strict enough modify the rule according to your needs. For a detailed description on how to modify firewall rules please have a look to the Administrator's Guide. Residing on the USB thumb drive delivered with your Barracuda NG Firewall appliance and is also available for download at www. barracudanetworks. com in the Barracuda NG Firewall product section. . Continue with any other firewall rule specifying access to the internet. Enable Layer 7 Application Profiling Click Application/IPS in the Views section on the left side of the rule window. If needed set Application Detection to Limit Bandwidth or Drop Traffic. Under Explicit Application Selection review, and if necessary, modify the protocols. The Protocols column represents all available protocols, the Selected Protocols column represents the currently selected ones that will be detected. When done click OK. Commit Changes To commit all previously done configuration steps, the new configuration needs to be activated at the Barracuda NG Firewall. This is indicated by the Activation Pending label. Click Send Changes followed by Activate. 3 NG Firewall Barracuda NG Firewall - Quick Configuration Guide WiFi Enable WiFi Commit Changes To commit all previously done configuration steps, the new configuration needs to be activated at the Barracuda NG Firewall. This is indicated by the Activation Pending label. Click Send Changes followed by Activate. Open the Simple Config screen and open the Network link within the Device Configuration section. This will open the network configuration window. On the left side menu (Configuration), open the WiFi link. · · · · Set WIFI Enabled to yes. Select a Channel appropriate to your country Select a Transmission Power level Note: As model F101 has no active cooling fan, the highest Transmission Power is only recommended, if the appliance is located in a cool and well ventilated location. 4 NG Firewall Barracuda NG Firewall - Quick Configuration Guide WiFi Configuration Select Config from the tab selection menu and switch to Full Config by clicking the Full Config button. In the Service Definition section set Disable Service to No and enter an optional descriptive text in the Description field. Commit Changes To commit all previously done configuration steps, the new configuration needs to be activated at the Barracuda NG Firewall. This is indicated by the Activation Pending label. In the upcoming tree structure navigate to WiFi: Virtual Servers > S1 EXPORT > Assigned Services > WiFi and open the configuration node by double clicking it. Double click on Service Properties. Click Send Changes followed by Activate. Close the configuration window by clicking . WiFi Security Options Stay in Full Config mode and open the WIFI AP Configuration node in the configuration tree. To enable modification of settings, click the Lock button in the upper-right area of the User Interface. 5 NG Firewall Barracuda NG Firewall - Quick Configuration Guide · · Enter Network Name (SSID) Click Insert to define a Preshared Key (PSK) Combination Network Activation Some changes within the network configuration require an activation of the box network infrastructure. This is indicated by a warning symbol of the Box control. Navigate to Control > Box and click Activate New within the Network Configuration section. Enter a password in the New and Confirm field in the appearing window. [. . . ] Click Send Changes followed by Activate. In the upcoming tree structure navigate to HTTP: Virtual Servers > S1 EXPORT > Assigned Services > HTTP and open the configuration node by double clicking it. Double click on Service Properties. Close the configuration window by clicking . To enable modification of settings, click the Lock button in the upper-right area of the User Interface. 9 NG Firewall Barracuda NG Firewall - Quick Configuration Guide DHCP Server Enable DHCP Service Select Config from the tab selection menu and switch to Full Config by clicking the Full Config button. Commit Changes To commit all previously done configuration steps, the new configuration needs to be activated at the Barracuda NG Firewall. This is indicated by the Activation Pending label. Click Send Changes followed by Activate. In the upcoming tree structure navigate to DHCP(DHCP Service): Virtual Servers > S1 EXPORT > Assigned Services > DHCP(DHCP Service) and open the configuration node by double clicking it. [. . . ]