User manual BARTSCHER 100323-207

[. . . ] The instruction manual forms part of the product and should be kept near the device and easily accessible for anyone carrying out the installation, servicing, maintenance or cleaning. In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. [. . . ] The refrigerator is intended only for cooling and storage of food products and beverages. Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Every leg must touch the floor, as otherwise the door may open and close improperly. Not at any time should you place the device on an inflammable surface. Do not place the device in the vicinity of open sources of fire, electric cookers, furnaces or other sources of heat such as e. The heat can damage the surface of the device, as well as have a negative effect on the cooling power and increase the consumption of energy. To avoid damage to the compressor, do not tilt the device to an angle greater than 45° during setup or transport. Be careful when touching the condenser and doors, as damage to them will negatively impact the working of the device. Place the device in such a manner that there is a minimum of 10 cm between it and other objects, including walls, in order to ensure proper air circulation. place the device in such a manner that the ventilation ducts are neither blocked or covered. Do not place the device where humidity or temperature are high as the device may be damaged. Before the first use the device should stand for at least 2 hours before it is connected to the power source. Do not drill holes in the device nor mount other objects to it. [. . . ] In the case of a sudden power outage lasting up to 20 minutes, do not open the device's door to avoid loss of cold. If the power outage lasts longer than 20 minutes, check all food products to ensure they have not reached critical temperature. The highest temperature at which products will not spoil is + 10° As mentioned above, avoid opening the device's door. After a power outage or after removing the plug from its socket, do not connect the device to an outlet for a minimum of 5 minutes. [. . . ]