User manual BARTSCHER 101.920 V4-0810

[. . . ] Keep this instruction manual ready to hand at the product!This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. In addition to the information given here, you should comply with any local Health and safety Controls and generally applicable safety regulations. [. . . ] Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. See that the cable does not touch any heat sources or sharp edges. do not let the cable dangle over the counter edge. Do not use the device in case it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. Do not lay the cable over carpets or heat insulations. Keep away the cable from operating range and do not dunk it into water. Do not move or tilt the device when in operation. Never turn off or remove the safety devices from the appliance. Keep stiff objects away from the mixing bowl and from the mixing tools during operation of the device. To avoid injuries and/or damages of the device keep hands, hair and clothes as well as spatulas or similar utensils away from the mixing bowl and from the mixing tools during operation of the device. Do not leave the device unattended during operation. [. . . ] Light mixes such as whipped cream, mayonnaise, egg whites, pancakes and soufflés There are three location points for the mixing bowl: a) b) c) the locking pin at the rear of the mixing bowl locates in the hole in the cradle; the two weld clips in the mixing bowl handles which engage on the pins located on the cradle; The mixing bowl locking latches on the right and on the left side. When changing the speed, always turn the device off first, select the new speed stage and then restart. Always follow the instructions on the side of the machine when changing gear. Operating the gearshift during operation results in wear and damage of the gear unit. [. . . ]