User manual BARTSCHER 101956

[. . . ] The instruction manual forms part of the product and should be kept near the device and easily accessible for anyone carrying out the installation, servicing, maintenance or cleaning. In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. [. . . ] Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. The rolling plate dispenser is only intended for warming, keeping warm, and distributing plates. Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. Always secure the device using the brake. Failure to secure the device can cause it to move unexpectedly and may result in injuries or damage to the device. Do not place metallic objects or other things on the device that may leave traces of rust. The socket used for the device must be secured to a minimum of 16A. Only connect the device directly to a grounded socket; do not use an extension cord or multiple plug socket. Place the device so that the plug is easily accessible and if necessary can be quickly disconnected from its power source. Wash the device prior to first use (see 6. While heating, the device may emit an unpleasant odour resulting from the heating of insulation material. For this reason, we recommend heating the device without plates for around 2 hours prior to first use. They should be adjusted to suit the circumference of the plates. To properly adjust the leads, lift them up and then move until the proper size is reached. [. . . ] Take care not to exceed the capacity given. Overloading the device may cause it to tilt over and lead to serious bodily injury and damage to the device! Cover the chambers with the plastic covers provided with the device. Turn the device on using the ON/OFF switch at the front of the device. [. . . ]