User manual BARTSCHER 103122-045

[. . . ] In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. Please follow the instructions very carefully and proceed with particular attention in these cases. [. . . ] Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. Hot oil splashes and fat explosions respectively may cause burns at hands and face!Before installation the local power grid specification should be compared with that of the device (see type label). connect the device only in case of compliance!Discard the complete packing material after unpacking the device. place the device on top of a solid , even , safe and stable surface that tolerates the weight. Not at any time you should place the device on top of an inflammable surface (such as: table cloth, carpet, etc. You must not position the device near open fireplaces, electric ovens/arc furnaces, furnaces/electric heaters or other heat sources. avoid installation spots with close contact to water. Remove the lid, basket, handle and other accessories from the device. Detach the switching unit from the device by lifting it carefully (until you hear a , , CLICK"-sound). Wash the cover, oil reservoir, frying basket, heating element shield and casing with a mild cleaning agent whilst taking care to avoid the introduction of moisture to the electrical installations and switching unit. [. . . ] the fryer is equipped with a thermostat for temperature regulation. Once the temperature in the oil container decreases the device initiates the heating process and the orange heating control lamp flashes up. During the work chips and oil in the oil container become very hot and there is a danger of catching fire. The device should not work for too long! [. . . ]