User manual BARTSCHER 1043423

[. . . ] In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. Please follow the instructions very carefully and proceed with particular attention in these cases. [. . . ] Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. the Mini display fridge is designed for cooling beverages in bottles and cans. Do not use the Mini display fridge for: storing flammable or explosive materials such as ether, oil and glue; storing pharmaceutical products or blood. Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. To avoid damage to the compressor, do not tilt the device to an angle greater than 45° during setup or transport. Be careful when touching the condenser and doors, as damage to them will negatively impact the working of the device. Place the device in such a manner that there is a minimum of 10 cm between it and other objects, including walls, in order to ensure proper air circulation. Do not place the device where humidity or temperature are high as the device may be damaged. Before the first use the device should stand for at least 2 hours before it is connected to the power source. Do not drill holes in the device nor mount other objects to it. The electrical circuit in the socket must be secured to at least 16A. Only connect the device directly to the wall socket; do not use any extension cords or power strips. Place the device so that the plug is easily accessible and can be quickly removed from its socket in case of necessity. Clean the device and equipment prior to first use (see 6. After cleaning, insert the shelves at heights appropriate for the bottles or cans with beverages that will be cooled in the device. [. . . ] If stored too closely together, they will not cool as effectively. Do not open the door during a sudden power outage, to avoid loss of cold. After an interruption in the power supply or after removing the plug from its socket, do not connect the Mini display fridge to a power source for at least 5 minutes. O Before beginning with repair or cleaning works make sure the device has been disconnected from power socket (pull the power plug! [. . . ]