User manual BARTSCHER 104408

[. . . ] All the information and instructions in this manual take into account standard safety regulations, current levels of technical engineering as well as the expertise and experience we have developed over the years. The instruction manual was translated with all due care and attention. However, we do not accept liability for any translation errors. the German version of this instruction manual is definitive. [. . . ] Outside the European Union, the industrial safety laws applicable at the place of installation of the device and the regional territorial provisions must be complied with. Besides the industrial safety instructions in the instruction manual, the general safety and accident prevention regulations as well as environment protection regulations applicable for area of application of the device must be followed and complied with. O The device is not intended for use by individuals (including children) with physical or mental disabilities, insufficient experience, and/or insufficient knowledge unless such persons are under the care of a person responsible for their safety or have received instructions regarding appropriate use of the device. Children should be observed to ensure that they are not playing with the device. When passing on/selling the device to a third party, the manuals must be handed over along with the device. Every person using the device must act in accordance to the manuals and under consideration of the safety advice. Safe operation is only guaranteed when using the device for its intended purpose. Any technical interventions, as well as assembly and maintenance are to be made by a qualified customer service only. the device is not intended for commercial use. The milk frother is intended only for frothing milk. Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. connect the device only in case of compliance!Discard the complete packing material after unpacking the device. Place the device on top of an even and safe surface which supports the weight of the device and is not heat sensitive. Not at any time should you place the device on an inflammable surface (such as: table cloth, carpet, etc. You must not position the device near open fireplaces, electric ovens/arc furnaces, furnaces/electric heaters or other heat sources. The electrical circuit in the socket must be secured to at least 16A. Only connect the device directly to the wall socket; do not use any extension cords or power strips. Place the device so that the plug is easily accessible and can be quickly removed from its socket in case of necessity. Wash the device thoroughly prior to first use (see 6. The table surface must be temperature resistant, dry, flat and stable. Place the container on the base to that the lower controller is inserted into the appropriate openings in the base. [. . . ] Ensure no water gets into the lower controller. O Use only soft cloths, never use harsh cleaners that may damage the device's surface and interior Teflon coating. O After washing, dry the surface of the device and polish with a soft, dry cloth. Never operate the device when the cable is damaged. [. . . ]