User manual BARTSCHER 105.785

[. . . ] Keep this instruction manual ready to hand at the product!This instruction manual contains information about the installation, operation and maintenance of the device and should be consulted as an important source of information and reference guide. Awareness of the safety instructions and instructions for use in this manual will ensure the safe and correct use of the device. In addition to the information given here, you should comply with any local Health and safety Controls and generally applicable safety regulations. [. . . ] In case of longer storage (> 3 months) make sure you check the state of the packaging and the parts regularly. Construction: interior and exterior of stainless steel temperature range: 0 ­ 290 ° C timer: 0 ­ 60 minutes for GN containers or bakery norms 600 x 400 mm cooking chamber lighting double glass doors direct steam induction ¾" water connection round baking chamber easy-to-understand symbols for simple use With timer with temperature control dial With timer with temperature control dial with multifunction dial 106. With timer with temperature control dial with multifunction dial with humidity function 206. 778 Convection oven BETA 2300 MX-UMI with grill and humidity function Convection oven BETA 4300 MX-UMI with grill and humidity function Convection oven BETA 2300 MX-UMI with grill and humidity function (water reservoir located at side of unit) With timer with temperature control dial with steamer 206. 796 Convection oven BETA 4300 PS-Vapor with humidity function Convection oven BETA 2500 GX-Vapor with humidity function Convection oven BETA 6400 PX-Vapor with humidity function With timer with temperature control dial with humidity function 105. 777 Convection oven BETA 3600 PX-UMI with humidity function Convection oven BETA 4400 PX-UMI with humidity function With timer with temperature control dial with multifunction dial with top-mounted water reservoir (for humidity) 205. The device must only be connected to a properly installed single socket with protective contact. Never yank cord to disconnect from outlet. See that the cable does not touch any heat sources or sharp edges. During operation some parts of the device become very hot. In order to avoid injuries do not touch any hot parts. Do not use the device in case it does not function properly, has been damaged or dropped. Do not use any accessory or spare parts that have not been recommended by the manufacturer. These can be dangerous for the user or lead to damages of the device or personal injury, and further, the warranty expires. Do not lay the cable over carpets or heat insulations. Keep away the cable from operating range and do not dunk it into water. Do not move or tilt the device when in operation. Before installation the local power grid specification should be compared with that of the device (see type label). connect the device only in case of compliance!The installation and maintenance of the appliance should only be carried out by trained personnel!Discard the complete packing material after unpacking the device. Place the device on top of an even and safe surface which supports the weight of the device and is not heat sensitive. [. . . ] O Before beginning with repair or cleaning works make sure the device has been disconnected from power socket (pull the power plug!O Do not use any acid agents and make sure no water ingresses the device. O To protect yourself from electric shock, never immerse the device, its cables and the plug in water or other liquids. Therefore, you must not use any kind of pressure water jet for cleaning the device! [. . . ]