User manual BARTSCHER 105836S-119

[. . . ] In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. Please follow the instructions very carefully and proceed with particular attention in these cases. [. . . ] Any use going beyond the intended purpose and/or any different use of the device is forbidden and is not considered as conventional. Any claims against the manufacturer or his authorized representative as a consequence of experiencing damages resulting from unconventional use are impossible. Please check the delivery upon completeness and transport damage immediately after receipt. In case of visible damage do not accept or accept the delivery with reservation only. Hidden damages should be reclaimed immediately after notice, as claims for damages can only be asserted within the effective period for complaints. Please do not throw away the covering carton of your device as it might be useful for storage purposes, when moving or, in case of damages, when the device must be sent back to a repair center. The outer and inner packing material should be removed completely from the device before installation. If you liked to dispose the packing, consider the regulations applicable in your country. In case any part is missing please contact our customer service center immediately. Keep the package closed until installation and under consideration of the outside indicated positioning- and storage markings. Packages should be stored under consideration of the following: Do not store outdoors. Place the device on top of an even and safe surface which supports the weight of the device. Not at any time should you place the device on an inflammable surface (such as: table cloth, carpet, etc. You must not position the device near open fireplaces, electric ovens/arc furnaces, furnaces/electric heaters or other heat sources. check that the device is connected to a grounded electrical installation. When setting up the vegetable cutter, take into account the space needed for the device, the container for cut vegetables and products to be cut. Ensure sufficient space around the vegetable cutter to allow the user freedom of movement, and for a second person to pass by. The device must be in a well-lit place, with lighting that illuminates the entire work station but does not blind the user. Ventilation openings must not be blocked, in order to avoid the device overheating and to prevent possible injury or loss. The electrical circuit in the socket must be secured to at least 16A. Only connect the device directly to the wall socket; do not use any extension cords or power strips. Place the device so that the plug is easily accessible and can be quickly removed from its socket in case of necessity. [. . . ] Never turn the safety close knob when the device is in use, always turn the device off first. Loosen the safety close by turning the knob counter-clockwise. With a cloth), then lift the blade up while grabbing under the blade and removing it. For work that requires the use of one cutting blade, mount only one rotating cutting blade on the plastic disc. [. . . ]