User manual BARTSCHER 106793 CONTROL PLAN

[. . . ] Provides straight-through, curl-free print path for transparencies, envelopes, labels and heavy paper. Sheets exit face up (for multi-page documents, select reverse order printing in your application Print dialog box). Short Edge Open the file you wish to print and click File Print. Note If you experience curling with 20 or 24 lb. [. . . ] Press Press + repeatedly until the second line of the display shows the Value (for envelopes, select COM-10 ENVELOPE) you wish to use. The ink on pre-printed letterhead stationery must be able to withstand 446°F (230°C) for 0. If you experience curling when printing a file in duplex mode, switch to 28-lb. Weights in this column are US Bond (see page 10 for more information). Print media must be able to withstand 446°F (230°C) for 0. Individual Jobs Make the following settings in the printer driver as you print the job: · Individual Jobs Make the following settings in the printer driver as you print the job: · Make the following settings in the printer driver as you print the job: · Size = see sizes at left · Envelopes must be able to withstand 446°F (230°C) for 0. Never use envelopes with metal clasps, snaps, windows, or V-flap seals: Make the following settings in the printer driver as you print the job: · The second line of the display starts blinking. Press + to toggle back and forth between DISABLE and ENBABLE. The new setting is engaged and the second line of the display stops blinking. Power Save sets how long the printer waits before going into standby mode. This saves energy, but the printer requires time to warm up when it receives a print job or if you want to enter the menu and change settings. If the sheet does not come out easily, go to step 3. If the sheet does come out easily, close the cover. Appears on the second line of the display to indicate that the lever for the toner cartridge color indicated is not pushed all the way back. Push the lock lever toward the back of the printer as far as it will go. If this does not clear the message, call your local service dealer. What to Do Replace the toner with a genuine BARTSCHER Toner Cartridge (see page 2). Appears on the second line of the display to indicate that color XXX toner cartridge is getting low. Note If you have changed the LOW TONER item in the SYSTEM CONFIG MENU to STOP, the ATTENTION light will blink and you must either replace the toner cartridge immediately or press the ON LINE button to continue printing. What to Do Be sure you have a genuine BARTSCHER replacement toner cartridge (see page 2) on hand. When this message appears, the printer stops after every 20 pages. To continue printing, you must open and close the top cover. [. . . ] You should feel the latches at either end engage. The printer has received a job for printing from the Multi-Purpose Tray and no media is loaded in the tray. What to Do Load the requested media (xxx) in the Multi-Purpose Tray, then press ON LINE. The hard disk drive is not available and job spooling cannot take place. [. . . ]