User manual BARTSCHER 114005

[. . . ] The instruction manual forms part of the product and should be kept near the device and easily accessible for anyone carrying out the installation, servicing, maintenance or cleaning. In this manual, symbols are used to highlight important safety instructions and any advice relating to the device. The instructions should be followed very carefully to avoid any risk of accident, personal injury or material damage. This symbol highlights hazards, which could lead to injury. [. . . ] It is extremely important to not damage the door and that it can be closed properly. Example of damage to the door which may be unsafe include the following: 1. The space between the door and the device must be free of foreign objects. Door seals must be tight and clean, as dirt and damage may allow electromagnetic waves to escape from the microwave oven. Take care to prevent buildup of any residues (e. Do not turn the microwave oven on when the door is open, as an excess of damaging electromagnetic waves may be emitted by the device. When in use, certain elements of the device are very hot. Never heat any flammable objects in the device. Do not prepare any food products which contain alcohol. Do not fry any food products in the device. Hot oil can lead to skin burns and/or damage to the device. Prior to heating food remove the bottle cap and nipple!Place the device on a flat, stable surface which can support the weight of a microwave oven, as well as heavy dishes and food products. Do not place the device near flammable materials avoid high temperatures, moisture and high humidity. To ensure proper functioning, the device must have sufficient ventilation. For this reason, it is necessary to maintain the following safe distances: - above the device: 20 cm - at rear of device: 10 cm - at sides of device: 5 cm. The device must remain a minimum distance of 2 m from radios, televisions, and other such electronics in order to avoid interference with the signal reception. The wall socket circuitry must be secured to a minimum of 16A. Connect the device directly to a wall-mounted socket; do not use extension cords or power strips. Position the device so that the plug is readily accessible and if necessary can be easily removed from its socket. Instead of traditional heat sources, a microwave oven applies an electron lamp which emits electromagnetic waves. These waves, like radio waves, are invisible but their effects can be observed. [. . . ] A delicate cleaning agent may be used in case of more stubborn dirt. Avoid using sprays and other aggressive cleaning agents, as such chemicals may leave stains on the device and even damage its surface. Wash the exterior surface of the device with a moist cloth. To protect the parts located inside the device from damage, do not allow water to seep through the ventilation ducts into the interior of the device. [. . . ]