User manual BARTSCHER 125.520 DATASHEET

[. . . ] Let it cool down before attempting to replace the transfer belt. the transfer belt unit up by the blue handle (squared). 1. Turn off the printer. 2. Pull up on the handle and lift the cover. 8. [. . . ] If necessary, pull the blue lock lever (circled) toward the front of the printer to lock the transfer belt into place. 5. Grasp both handles and lift the transfer belt unit out of the printer. Discard in accordance with local regulations. 9. Place the drum/toner cradle back into the printer. 3. Lift out the drum/toner cradle. Caution!Make sure the blue lock levers at either end of the fuser have snapped back locking the fuser unit in place. THIS LIMITED WARRANTY IS THE SOLE AND EXCLUSIVE WARRANTY OFFERED ON THIS CONSUMABLE ITEM, AND BARTSCHER DATA OFFERS NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. Oki Data shall not be responsible or liable for any special, incidental or consequential damages or loss arising from the use of this product. This Limited Warranty applies to all Oki Consumables, however the procedure for obtaining coverage under this Limited Warranty is available by contacting the Oki dealer from whom the product was purchased, by contacting Oki Data directly at 1-800BARTSCHER-DATA (U. S. and Canada, English only) or at 1-856-222-5276 (Spanish only), or by contacting one of the service locations listed below. For the most comprehensive, up-todate information on service center locations, call 1-800-BARTSCHER-DATA (1800-654-3282). This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Oki Data Service Centers United States Oki Data Americas, Inc. [. . . ] Laurel, NJ 08054 Phone: 1-800-654-3282 Fax: 1-856-222-5247 Canada Oki Data Americas, Inc. East, Unit 1 Mississauga, Ontario L4W 4M8 Canada Phone: 1-800-654-3282 Fax: 1-905-238-4421 Mexico Oki Data de Mexico, S. A. [. . . ]